Summary for Test 2023-05-18-13-5
Test performed: CTM 523-May 2020Project Information
| Project Identifiers | Project ID: 215180 DEA: 060Q9204 EFIS: 0614000010 COOP: 061764 |
|---|---|
| DIST-CO-RTE-PM | 06-KER-99-10.4/21.2 |
| Award Date | 12/08/2020 |
| Closeout Date | Not set |
| Work Description | CONSTRUCT CRCP AND HMA (TYPE A) PAVEMENT. |
| Location Description | KERN COUNTY IN AND NEAR BAKERSFIELD FROM 0.4 MILE SOUTH OF OLD US 99 OVERCROSSING TO 0.1 MILE NORTH OF WHITE LANE OVERCROSSING |
| QA Service Level | 1 (Verified on 09/14/2020) |
Sample Information
| Sample Taken Date | 05/18/2023 | Sample Unique Key | 13 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/18/2023 |
| Sample type | Department Acceptance | A brief description of the sample | CRCP -12 field curing and 4 standard curing beams set #1 |
| The quantity of what the sample constitutes | 460 CY load # 46 | From where was the sample collected | Source |
| First name of sampler or witnessed by | James | Last name of sampler or witnessed by | Watson |
| Title of sampler | Telephone number of sampler | 6615498281 | |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Hwy 223 off ramp sb 99 | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Concrete | The concrete mix design number | G3-21-PCC-263 |
|---|---|---|---|
| The truck number from where the sample was collected | 2 | The batch plant ticket number from where the sample was collected | 246 |
| Concrete batch plant | The fabricator/manufacturer designation for the sample | ||
| A detailed description of where the material sample was collected | Back of Truck | Where the material sample would have been placed if not sampled | |
| From Lot No. | Bag Lot No. |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-05-18-13
DIME Test ID: 2023-05-18-13-5
Testing Lab: CT D06 - Bakersfield Field Laboratory
Test Method: CTM 523-May 2020: Method of Test for Flexural Strength of Concrete
Test Release Date: 2023-05-31
Test Results
Number of specimens: 3
Unit system used?: US Units
Does the testing machine measure load or stress on the beam specimen?: Load
Fracture initiates in the tension surface: Within the Middle Third of the Span Length
Is a beam dimensional correction factor used?: No
Input Type: Measured
Tester's full name: Neale Brown
Date of test: 05/31/2023
Identification number: 33
Width of specimen: 5.9 inch
Width of specimen 2: 6 inch
Width of specimen 3: 5.95 inch
Depth of specimen: 6.15 inch
Depth of specimen 2: 6.15 inch
Depth of specimen 3: 6.1 inch
Span length of specimen: 18 inch
Span length of specimen 2: 18 inch
Span length of specimen 3: 18 inch
Maximum load applied: 6960 lb
Maximum load applied 2: 7510 lb
Maximum load applied 3: 7000 lb
Curing history and apparent moisture condition of the specimen: Good and Field Curing Beams
If specimen was capped, ground or if leather shims were used: Leather shims were used
Defects in specimen: 0
Age of specimen: 13 days
Age of specimen in hours: 0 hours
Modulus of rupture: 560 psi
Modulus of rupture 2: 595 psi
Modulus of rupture 3: 570 psi
Modulus of rupture average: 575 psi
General comments (publicly viewable) (Max 1000 characters): Field curing beam set #33
Test File Attachments
| File Name | Extension | File Size | Date Uploaded | Test ID | Actions |
|---|---|---|---|---|---|
| 06-0Q9204_37085_230518_13D_33 | 186.14 KB | 05/31/2023 | 2023-05-18-13-5 | Info |
Test was verified on 5/31/2023 ✔