Summary for Test 2023-04-19-79-4
Test performed: AASHTO T209-22Project Information
| Project Identifiers | Project ID: 214986 DEA: 041J9704 EFIS: 0414000404 |
|---|---|
| DIST-CO-RTE-PM | 04-SCL-17-2.8/13.94 |
| Award Date | 04/30/2021 |
| Closeout Date | 10/06/2025 |
| Work Description | PAVING WITH RHMA, COLD PLANE AC, AND INSTALL CULVERT. |
| Location Description | SANTA CLARA COUNTY IN AND NEAR LOS GATOS, CAMPBELL AND SAN JOSE FROM HEBARD ROAD TO ROUTE 17/280 SEPARATION |
| QA Service Level | 1 (Verified on 10/19/2020) |
Sample Information
| Sample Taken Date | 04/19/2023 | Sample Unique Key | 79 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/19/2023 |
| Sample type | Quality Assurance | A brief description of the sample | MIX:917 3/4" RHMA-G SP |
| The quantity of what the sample constitutes | 24 boxes HMA, 4 qts Oil, 5 BAGS BIN 1, 5 BAGS BIN 2, 5 BAGS BIN 3, 4 BAGS BIN 4 | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Jerrod | Last name of sampler or witnessed by | Naval |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Graniterock Aromas Batch plant | Transportation Laboratory (TL) Number | TL-C927716 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Production startup Lot 1 sublot 102 | Structure unique identifier | |
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-35-0012 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Material pulled from bin 1, 2, 3 AND 4 | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-04-19-79
DIME Test ID: 2023-04-19-79-4
Testing Lab: CT D04 - Concord Field Laboratory
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Test Release Date: 2024-02-12
Test Results
Number of Samples: 2
What is the unit of measurement for theoretical density?: SI Units
Mass Determination: Air
Input Type: Measured
Tester's full name: Charles Poolis
Date of test: 04/19/2023
Method Performed: Mechanical Agitation - Method A
Mass of container filled with water 1: 7313.5 grams
Mass of oven-dry sample in air for Sample 1: 2580.4 grams
Mass of container filled with the sample and water for Sample 1: 8856.6 grams
Mass of container filled with water 2: 7313.5 grams
Mass of oven-dry sample in air for Sample 2: 2580.4 grams
Mass of container filled with the sample and water for Sample 2: 8856.6 grams
Temperature of Water: 72 °F
Specific Gravity for Sample 1: 2.488
Specific Gravity for Sample 2: 2.488
Average Specific Gravity: 2.488
Theoretical maximum density at 25°C (77°F): 2480.8 kg/m^3
General comments (publicly viewable) (Max 1000 characters): LOT 1 Sublot 102 and 103.
TL-0101: C927716
04/19/2023
Test was verified on 2/12/2024 ✔