Summary for Test 2023-04-15-5-1
Test performed: AASHTO T315-22Project Information
| Project Identifiers | Project ID: 993386 DEA: 060R1904 EFIS: 0614000057 COOP: 061783 |
|---|---|
| DIST-CO-RTE-PM | 06-KER-184,223-L0.0/L0.3,R15.7/R16.3 |
| Award Date | 01/25/2022 |
| Closeout Date | 04/08/2024 |
| Work Description | CONSTRUCT ROUNDABOUT, CURB RAMPS, AND LIGHTING SYSTEMS. |
| Location Description | KERN COUNTY NEAR ARVIN ON ROUTE 184 FROM ROUTE 223 TO 0.3 MILE NORTH OF ROUTE 223 AND ON ROUTE 223 FROM 0.3 MILE WEST OF ROUTE 184 TO 0.3 MILE EAST OF ROUTE 184 |
| QA Service Level | 1 (Verified on 11/15/2021) |
Sample Information
| Sample Taken Date | 04/15/2023 | Sample Unique Key | 5 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 04/25/2023 | Sample type | Department Acceptance |
| A brief description of the sample | Asphalt Binder Sample | The quantity of what the sample constitutes | 1 can binder |
| From where was the sample collected | Supplier | First name of sampler or witnessed by | P |
| Last name of sampler or witnessed by | Klinker | Title of sampler | TET |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | San Joaquin Refining Co Inc | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Asphalt Binder | Performance Grade | PG 64-10 |
|---|---|---|---|
| Modified | No | Lot number | 2185230409 |
| Sublot number | Tank number | TK 20004 | |
| Time of sample | 8:04 AM | HMA Supplier | |
| Certified Asphalt Supplier | San Joaquin Refinery - Bakersfield CA | Multigrade | No |
| Multigrade Type | Asphalt Binder Mix Number | ||
| HMA Type | Not set | HMA Supplier Mix ID Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-04-15-5
DIME Test ID: 2023-04-15-5-1
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2023-04-28
Test Results
Phase: Original binder
Input Type: Measured
Tester's full name: Erika Gonzalez
Date of test: 04/27/2023
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 12.00 %
Stress Amplitude: 0.195 kPa
Phase Angle (δ) (for the 10 cycles): 89.4 degree
Complex Modulus (G*) (for the 10 measurements): 1.626 kPa
Test Temperature (Specimen 1): 64.0 C
Dynamic Shear, G*/sin(δ): 1.63 kPa
General comments (publicly viewable) (Max 1000 characters): original
Test was verified on 4/28/2023 ✔