Summary for Test 2023-04-22-4-1
Test performed: CTM 202-November 2011Project Information
| Project Identifiers | Project ID: 993804 DEA: 043J0624 EFIS: 0419000534 |
|---|---|
| DIST-CO-RTE-PM | 04-SM-101-16.5/23.0 |
| Award Date | 08/24/2022 |
| Closeout Date | 04/10/2024 |
| Work Description | COLD PLANE AND PLACE HMA, REPLACE GUARDRAIL AND CURB RAMPS. |
| Location Description | SAN MATEO COUNTY AT VARIOUS LOCATION FROM BROADWAY OVERCROSSING TO 0.2 MILE NORTH OF OYSTER POINT BOULEVARD OVERCROSSING |
| QA Service Level | 1 (Verified on 05/19/2022) |
Sample Information
| Sample Taken Date | 04/22/2023 | Sample Unique Key | 4 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 04/24/2023 | Sample type | Quality Assurance |
| A brief description of the sample | PCC 1X#4 Coarse Agg | The quantity of what the sample constitutes | 35 cu yd |
| From where was the sample collected | Job Site | First name of sampler or witnessed by | Luis |
| Last name of sampler or witnessed by | Magana | Title of sampler | |
| Telephone number of sampler | 2092250104 | Laboratory sample identification | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Vanguard Batch Plant | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | Orca Quarry, Port Mcneill, B.C. |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Jobsite Stockpile | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1 inch | |
| The concrete mix design number | HE4X4BM | Lot number | |
| Sublot number | Aggregate Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-04-22-4
DIME Test ID: 2023-04-22-4-1
Testing Lab: CT D04 - Hayward Field Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2023-04-25
Test Results
What size aggregate is being tested?: 1 in. x No. 4 - Coarse Aggregate
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Measured
Tester's full name: Luis Magana
Date of test: 04/25/2023
| Sieve Size | Cumulative Mass Retained | Cumulative Percent Passing | ||||
|---|---|---|---|---|---|---|
| 10200 grams | ||||||
| 0.0 grams | 100 % | |||||
| 90.0 grams | 99 % | |||||
| 1830.0 grams | 82 % | |||||
| 6535.0 grams | 36 % | |||||
| 6770.0 grams | 34 % | |||||
| 9725.0 grams | 5 % | |||||
| 9980.0 grams | 2 % | |||||
| 10200.0 grams | ||||||
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 4/25/2023 ✔