Summary for Test 2023-01-10-25-1
Test performed: CTM 202-November 2011Project Information
| Project Identifiers | Project ID: 215677 DEA: 044G0804 EFIS: 0412000332 COOP: 042676 |
|---|---|
| DIST-CO-RTE-PM | 04-SOL-80-R10.4/30.2 |
| Award Date | 01/18/2022 |
| Closeout Date | Not set |
| Work Description | Highway widening, overhead signs, and electronic toll system. |
| Location Description | In Solano County in Fairfield and Vacaville from 1.0 mile west of Red Top Road Undercrossing to 0.4 mile east of Leisure Town Road Overcrossing. |
| QA Service Level | 1 (Verified on 04/11/2022) |
Sample Information
| Sample Taken Date | 01/10/2023 | Sample Unique Key | 25 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 01/10/2023 | Sample type | Annual Source Testing |
| A brief description of the sample | 1x 4 Pcc Aggregate | The quantity of what the sample constitutes | 10 Bags |
| From where was the sample collected | Source | First name of sampler or witnessed by | Not Witness |
| Last name of sampler or witnessed by | Plant Employee | Title of sampler | QC Technician |
| Telephone number of sampler | (925) 406-9947 | Laboratory sample identification | Rich_23_003 |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Cemex Clayton | |
| Transportation Laboratory (TL) Number | C727396 | Inspector Lot Number from the Transportation Laboratory (TL) Form | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-07-0004 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Stockpile @ Yard | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-01-10-25
DIME Test ID: 2023-01-10-25-1
Testing Lab: CT D04 - Concord Field Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2023-03-22
Test Results
What size aggregate is being tested?: 1 in. x No. 4 - Coarse Aggregate
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: Yes
For Combined Gradation only, use #40 Sieve?: No
Input Type: Measured
Tester's full name: Nick Hall
Date of test: 01/11/2023
| Sieve Size | Cumulative Mass Retained | Cumulative Percent Passing | ||||
|---|---|---|---|---|---|---|
| 10590 grams | ||||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 465.0 grams | 96 % | |||||
| 3900.0 grams | 63 % | |||||
| 5880.0 grams | 44 % | |||||
| 10295.0 grams | 3 % | |||||
| 10410.0 grams | 2 % | |||||
| 0.0 grams | ||||||
General comments (publicly viewable) (Max 1000 characters): PCC 1 X #4 Source test
Test was verified on 3/22/2023 ✔