Summary for Test 2023-03-16-6-3
Test performed: AASHTO T315-22Project Information
| Project Identifiers | Project ID: 994212 DEA: 010E0104 EFIS: 0113000090 |
|---|---|
| DIST-CO-RTE-PM | 01-HUM-36-0.1/1.65 |
| Award Date | 12/07/2022 |
| Closeout Date | Not set |
| Work Description | Alton 015 Shoulder Widening |
| Location Description | HUMBOLDT COUNTY NEAR ALTON FROM 0.1 MILE EAST OF ROUTE 36/101 SEPARATION TO 1.7 MILES EAST OF ROUTE 36/101 SEPARATION |
| QA Service Level | 1 (Verified on 09/09/2022) |
Sample Information
| Sample Taken Date | 03/16/2023 | Sample Unique Key | 6 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 03/20/2023 |
| Sample type | Department Acceptance | A brief description of the sample | binder sample JMF |
| The quantity of what the sample constitutes | 1 can | From where was the sample collected | Source |
| First name of sampler or witnessed by | jayce | Last name of sampler or witnessed by | Brown |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Valero Benicia | Transportation Laboratory (TL) Number | 000000 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Asphalt Binder | Performance Grade | PG 58-22 |
|---|---|---|---|
| Modified | No | Lot number | |
| Sublot number | Tank number | ||
| Time of sample | HMA Supplier | Mercer Fraser Fortuna Plant | |
| Certified Asphalt Supplier | Valero Marketing & Supply - Benicia CA | Multigrade | No |
| Multigrade Type | Asphalt Binder Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-03-16-6
DIME Test ID: 2023-03-16-6-3
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2023-03-21
Test Results
Phase: Original binder
Input Type: Measured
Tester's full name: Erika Gonzalez
Date of test: 03/20/2023
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 12.00 %
Stress Amplitude: 0.243 kPa
Phase Angle (δ) (for the 10 cycles): 82.4 degree
Complex Modulus (G*) (for the 10 measurements): 2.025 kPa
Test Temperature (Specimen 1): 64.0 C
Dynamic Shear, G*/sin(δ): 2.04 kPa
General comments (publicly viewable) (Max 1000 characters): OG - tested at 64C for information only
Test was verified on 3/21/2023 ✔