Summary for Test 2023-01-06-34-1
Test performed: CTM 521-June 2012Project Information
| Project Identifiers | Project ID: 214135 DEA: 09213404 EFIS: 0900000030 |
|---|---|
| DIST-CO-RTE-PM | 09-INY-395-29.9/41.8 |
| Award Date | 10/22/2021 |
| Closeout Date | 05/29/2026 |
| Work Description | ROADWAY EXCAVATION, PLACE HMA (TYPE A), AND ALTERNATIVE PIPE CULVERT. |
| Location Description | INYO COUNTY NEAR OLANCHA AND CARTAGO FROM 1.4 MILES SOUTH OF LOS ANGELES AQUEDUCT BRIDGE TO 0.2 MILE SOUTH OF ASH CREEK BRIDGE |
| QA Service Level | 1 (Verified on 05/03/2019) |
Sample Information
| Sample Taken Date | 01/06/2023 | Sample Unique Key | 34 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 01/13/2023 | Sample type | Department Acceptance |
| A brief description of the sample | PCC cylinders | The quantity of what the sample constitutes | 15 CY |
| From where was the sample collected | Job Site | First name of sampler or witnessed by | Derek |
| Last name of sampler or witnessed by | Armon | Title of sampler | Structures Rep |
| Telephone number of sampler | Laboratory sample identification | 2897 | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | 7/11 Materials, Ridgecrest | |
| Transportation Laboratory (TL) Number | 09 | Inspector Lot Number from the Transportation Laboratory (TL) Form | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Concrete | The concrete mix design number | 01-01-2023 |
|---|---|---|---|
| The truck number from where the sample was collected | The batch plant ticket number from where the sample was collected | 9999 | |
| Concrete batch plant | The fabricator/manufacturer designation for the sample | ||
| A detailed description of where the material sample was collected | Sample taken from the chute | Where the material sample would have been placed if not sampled | |
| From Lot No. | Bag Lot No. |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-01-06-34
DIME Test ID: 2023-01-06-34-1
Testing Lab: CT D09 - Bishop Field Laboratory
Test Method: CTM 521-June 2012: Method of Test for Compressive Strength of Molded Concrete Cylinders
Test Release Date: 2023-02-13
Test Results
Number of specimens: 3
Input Type: Measured
Tester's full name: Derek Carrington
Date of test: 02/03/2023
Cylinder Diameter, Cylinder 1 (measurement 1): 12.56 in
Cylinder Diameter, Cylinder 1 (measurement 2): 12.56 in
Cylinder Diameter, Cylinder 2 (measurement 1): 12.56 in
Cylinder Diameter, Cylinder 2 (measurement 2): 12.56 in
Cylinder Diameter, Cylinder 3 (measurement 1): 12.56 in
Cylinder Diameter, Cylinder 3 (measurement 2): 12.56 in
Maximum Load, Cylinder 1: 60185 lb
Maximum Load, Cylinder 2: 60395 lb
Maximum Load, Cylinder 3: 59085 lb
Correction factor: 1
Cylinder Age: 28 days
Break Description of Cylinder 1 (if not 'cone'): no data
Break Description of Cylinder 2 (if not 'cone'): no data
Break Description of Cylinder 3 (if not 'cone'): no data
Average Diameter, Cylinder 1: 12.56 in
Average Diameter, Cylinder 2: 12.56 in
Average Diameter, Cylinder 3: 12.56 in
Cross-Sectional Area of Cylinder 1: 123.9 in^2
Cross-Sectional Area of Cylinder 2: 123.9 in^2
Cross-Sectional Area of Cylinder 3: 123.9 in^2
Average Compressive Strength (to nearest 10): 4770 lb/in^2
Compressive Strength of Cylinder 1: 485.75 lb/in^2
Compressive Strength of Cylinder 2: 487.45 lb/in^2
Compressive Strength of Cylinder 3: 476.88 lb/in^2
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 2/13/2023 ✔