DIME - Test Summary

Summary for Test 2022-11-21-30-2

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 214438 DEA: 080G6914 EFIS: 0815000184
DIST-CO-RTE-PM	08---
Award Date	06/13/2022
Closeout Date	07/22/2025
Work Description	RELINE OR REPLACE CULVERTS
Location Description	SAN BERNARDINO COUNTY IN AND NEAR SAN BERNARDINO FROM 48TH STREET TO ROUTE 18/138 SEPARATION
QA Service Level	1 (Verified on 06/24/2021)

Sample Taken Date	11/21/2022	Sample Unique Key	30
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	12/01/2022
Sample type	Verification	A brief description of the sample	3/4" HMA-A-SP R12 0.75%LAS
The quantity of what the sample constitutes	2 Bags of Combined Aggregate	From where was the sample collected	Job Site
First name of sampler or witnessed by	Matich QC	Last name of sampler or witnessed by	Matich QC
Title of sampler		Telephone number of sampler
Laboratory sample identification	0762A-22	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Matich Lytle Creek	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-36-0040
The fabricator's/manufacturer's product name for the sample	3/4 HMA-A-SP R12	The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Belt Cut at Matich Lytle Creek Plant
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number	LHP-62D	Lot number
Sublot number		Aggregate Mix Number

DIME Sample ID: 2022-11-21-30

DIME Test ID: 2022-11-21-30-2

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2023-01-18

Input Type: Measured

Tester's full name: Friday Ofoegbu

Date of test: 11/30/2022

Mass of saturated surface dry sample (before pycnometer) (S): 500.0 grams

Mass of the pycnometer with water and aggregate (C): 960.1 grams

Mass of the pycnometer with water (B): 648.8 grams

Mass of the oven dried sample (before pycnometer) (A): 494.0 grams

Mass of the saturated surface dry aggregate (for absorption) (S): 500.0 grams

Mass of the oven dry aggregate (for absorption) (A): 494.0 grams

Test Sample Preparation: 6% Moisture

Bulk specific gravity: 2.618

Bulk specific gravity (SSD Basis): 2.650

Apparent specific gravity: 2.704

Absorption: 1.2 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 1/18/2023 ✔