Summary for Test 2022-11-04-45-1
Test performed: CTM 202-November 2011Project Information
| Project Identifiers | Project ID: 993410 DEA: 120Q3204 EFIS: 1216000129 |
|---|---|
| DIST-CO-RTE-PM | 12-ORA-22-R10.7/R12.7 |
| Award Date | 01/18/2022 |
| Closeout Date | 01/03/2024 |
| Work Description | REPLACE CONCRETE BARRIER & SIGN PANEL; & MODIFY LIGHTING SYSTEM. |
| Location Description | ORANGE COUNTY IN SANTA ANA AND ORANGE FROM 0.2 MILE WEST OF BEDFORD ROAD OVERCROSSING TO 0.2 MILE WEST OF TUSTIN AVENUE UNDERCROSSING |
| QA Service Level | 1 (Verified on 12/15/2021) |
Sample Information
| Sample Taken Date | 11/04/2022 | Sample Unique Key | 45 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 11/04/2022 |
| Sample type | Quality Assurance | A brief description of the sample | Concrete aggregates 1 inch x No 4 coarse and sand |
| The quantity of what the sample constitutes | Three Bags | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Vincent / David | Last name of sampler or witnessed by | Tran / Nguyen |
| Title of sampler | Transportation Engineer Technician | Telephone number of sampler | 949-473-4006 / 949-279-8470 |
| Laboratory sample identification | 22-1135 | Linked DIME Sample ID | 2022-11-04-44 |
| The fabricator/manufacturer/facility name | Cemex Orange | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-36-0040 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Conveyor Belt | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1 inch | |
| The concrete mix design number | 1611795 | Lot number | |
| Sublot number | Aggregate Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2022-11-04-45
DIME Test ID: 2022-11-04-45-1
Testing Lab: CT D12 - Huntington Beach Field Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2023-05-15
Test Results
What size aggregate is being tested?: 1 in. x No. 4 - Coarse Aggregate
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Measured
Tester's full name: Vincent Tran / David Nguyen
Date of test: 11/04/2022
| Cumulative Mass Retained | Cumulative Percent Passing | |||||
|---|---|---|---|---|---|---|
| 10020 grams | ||||||
| 0 grams | 100 % | |||||
| 500 grams | 95 % | |||||
| 3400 grams | 66 % | |||||
| 7380 grams | 26 % | |||||
| 9010 grams | 10 % | |||||
| 9670 grams | 3 % | |||||
| 10020 grams | 0 % | |||||
| 10020 grams | ||||||
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 5/15/2023 ✔