Summary for Test 2022-10-21-39-1
Test performed: AASHTO T27-14Project Information
| Project Identifiers | Project ID: 214666 DEA: 022H8104 EFIS: 0217000012 |
|---|---|
| DIST-CO-RTE-PM | 02-TRI-299-1.67/45.12 |
| Award Date | 03/03/2022 |
| Closeout Date | 08/11/2023 |
| Work Description | TRINITY CULVERTS |
| Location Description | CULVERT REHABILITATION IN TRINITY COUNTY NEAR SALYER AT VARIOUS LOCATIONS FROM 0.1 MILE WEST OF WHITE HOUSE GULCH ROAD TO 0.4 MILE WEST OF SLATTERY POND ROAD. |
| QA Service Level | 1 (Verified on 03/02/2020) |
Sample Information
| Sample Taken Date | 10/21/2022 | Sample Unique Key | 39 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/21/2022 |
| Sample type | Department Acceptance | A brief description of the sample | Combined Lime Treated 3/4-inch Type A Aggregate |
| The quantity of what the sample constitutes | Production Start-Up Evaluation | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | J.D. | Last name of sampler or witnessed by | Atkinson |
| Title of sampler | Consultant | Telephone number of sampler | |
| Laboratory sample identification | D79177F | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Tullis – Northstate Asphalt (Redding, CA) | Transportation Laboratory (TL) Number | 858106 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-45-0057::Shasta Ranch Aggregates |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Mathematically Combined Gradation per CT 384 | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2022-10-21-39
DIME Test ID: 2022-10-21-39-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2022-10-31
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: No
Input Type: Calculated
Tester's full name: Darrell Valasek
Date of test: 10/31/2022
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 100 %
Cumulative percent passing the 1/2 in. sieve: 90 %
Cumulative percent passing the 3/8 in. sieve: 67 %
Cumulative percent passing the #4 sieve: 39 %
Cumulative percent passing the #8 sieve: 27 %
Cumulative percent passing the #16 sieve: 18 %
Cumulative percent passing the #30 sieve: 13 %
Cumulative percent passing the #50 sieve: 9 %
Cumulative percent passing the #100 sieve: 7 %
Cumulative percent passing the #200 sieve: 5.1 %
General comments (publicly viewable) (Max 1000 characters): Mathematically combined at 76.0% virgin aggregate and 24.0% reclaimed aggregate per CT 384
Test was verified on 10/31/2022 ✔