DIME - Test Summary

Summary for Test 2022-10-10-25-2

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 993594 DEA: 120S9104 EFIS: 1221000060
DIST-CO-RTE-PM	12-ORA-57-11.0/22.2
Award Date	04/07/2022
Closeout Date	09/07/2023
Work Description	COLD PLANE AC PAVEMENT AND PLACE RHMA-G.
Location Description	ORANGE COUNTY AT VARIOUS LOCATIONS FROM 0.2 MILE SOUTH OF CHAPMAN AVENUE UNDERCROSSING TO 0.3 MILE SOUTH OF LOS ANGELES COUNTY LINE
QA Service Level	1 (Verified on 03/21/2022)

Sample Taken Date	10/10/2022	Sample Unique Key	25
Date that the sample was received by the laboratory/organization performing the testing	10/12/2022	Sample type	Verification
A brief description of the sample	JMF 1/2" RWHMA-G-SP 0.25% EVO	The quantity of what the sample constitutes	4 Bags Of Aggregate
From where was the sample collected	Manufacturer	First name of sampler or witnessed by	R J Noble
Last name of sampler or witnessed by	QC	Title of sampler
Telephone number of sampler		Laboratory sample identification	0686G-22
Linked DIME Sample ID		The fabricator/manufacturer/facility name	R J Noble Orange
Transportation Laboratory (TL) Number		Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier		Structure name
Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-33-0035, 91-33-0014
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number	50R003ARSPWEO	A detailed description of where the material sample was collected	Belt Cut at R J Noble- Orange
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

DIME Sample ID: 2022-10-10-25

DIME Test ID: 2022-10-10-25-2

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2022-11-30

Input Type: Measured

Tester's full name: Satish Jain/ Amir Behjati

Date of test: 10/14/2022

Mass of saturated surface dry sample (before pycnometer) (S)	500.0 grams
Mass of the pycnometer with water and aggregate (C)	984.0 grams
Mass of the pycnometer with water (B)	674.7 grams
Mass of the oven dried sample (before pycnometer) (A)	488.4 grams
Mass of the saturated surface dry aggregate (for absorption) (S)	500.0 grams
Mass of the oven dry aggregate (for absorption) (A)	488.4 grams
Test Sample Preparation	6% Moisture
Bulk specific gravity	2.561
Bulk specific gravity (SSD Basis)	2.622
Apparent specific gravity	2.727
Absorption	2.4 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 11/30/2022 ✔