Summary for Test 2022-08-31-61-2
Test performed: AASHTO T275-07r12Project Information
| Project Identifiers | Project ID: 993603 DEA: 051N7004 EFIS: 0521000081 |
|---|---|
| DIST-CO-RTE-PM | 05-SLO-166-16.0/21.0 |
| Award Date | 04/22/2022 |
| Closeout Date | 03/28/2023 |
| Work Description | PARTIAL DEPTH RECYCLING AND OVERLAY WITH RHMA (GAP GRADED). |
| Location Description | SAN LUIS OBISPO COUNTY ABOUT 8 MILES EAST OF SANTA MARIA FROM 0.5 MILE WEST OF HUASNA RIVER BRIDGE TO 1.9 MILES WEST OF CUYAMA RIVER BRIDGE. |
| QA Service Level | 1 (Verified on 03/28/2022) |
Sample Information
| Sample Taken Date | 08/31/2022 | Sample Unique Key | 61 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/14/2022 |
| Sample type | Dispute Resolution | A brief description of the sample | 3/4" RHMA-G |
| The quantity of what the sample constitutes | L1 SL16 | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Isaac | Last name of sampler or witnessed by | Gleffe |
| Title of sampler | QC | Telephone number of sampler | 18053191237 |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Papich Templeton | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | RHMA-G |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | 1 |
| Sublot number | 16 | HMA Mix Number | |
| Binder content (%) | Not set | Virgin binder PG | Not set |
| Design binder PG | Not set | Binder Supplier | Not set |
| RAP content (%) | Not set | WMA Additives | Not set |
| Antistrip type | Not set |
Test Details
DIME Sample ID: 2022-08-31-61
DIME Test ID: 2022-08-31-61-2
Testing Lab: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Test Release Date: 2022-10-28
Test Results
Number of tests: 3
What test procedure is performed?: Method A
Input Type: Measured
Tester's full name: Glenn Bradley
Date of test: 10/26/2022
Mass of the dry specimen in air: 4471.6 g
Mass of the dry specimen plus paraffin coating in air: 4528.6 g
Mass of the dry specimen plus paraffin coating in water: 2520.3 g
Specific gravity of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Mass 2 of the dry specimen in air: 4471.5 g
Mass 2 of the dry specimen plus paraffin coating in air: 4534.3 g
Mass 2 of the dry specimen plus paraffin coating in water: 2522.3 g
Specific gravity 2 of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Mass 3 of the dry specimen in air: 4472.3 g
Mass 3 of the dry specimen plus paraffin coating in air: 4540.0 g
Mass 3 of the dry specimen plus paraffin coating in water: 2522.1 g
Specific gravity 3 of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Bulk Specific Gravity: 2.299
Bulk Specific Gravity 2: 2.302
Bulk Specific Gravity 3: 2.302
Average Bulk Specific Gravity: 2.301
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 10/28/2022 ✔
