DIME - Test Summary

Summary for Test 2022-08-31-58-4

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 993603 DEA: 051N7004 EFIS: 0521000081
DIST-CO-RTE-PM	05-SLO-166-16.0/21.0
Award Date	04/22/2022
Closeout Date	03/28/2023
Work Description	PARTIAL DEPTH RECYCLING AND OVERLAY WITH RHMA (GAP GRADED).
Location Description	SAN LUIS OBISPO COUNTY ABOUT 8 MILES EAST OF SANTA MARIA FROM 0.5 MILE WEST OF HUASNA RIVER BRIDGE TO 1.9 MILES WEST OF CUYAMA RIVER BRIDGE.
QA Service Level	1 (Verified on 03/28/2022)

Sample Taken Date	08/31/2022	Sample Unique Key	58
Date that the sample was received by the laboratory/organization performing the testing	10/19/2022	Sample type	Dispute Resolution
A brief description of the sample	Aggregate	The quantity of what the sample constitutes	L1SL16
From where was the sample collected	Manufacturer	First name of sampler or witnessed by	Isaac
Last name of sampler or witnessed by	Gleffe	Title of sampler	ARET
Telephone number of sampler	18053191237	Laboratory sample identification	22-JMFD-0155
Linked DIME Sample ID		The fabricator/manufacturer/facility name	SPM-Templeton
Transportation Laboratory (TL) Number		Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier		Structure name
Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-10-0006
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Source
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number	1
Sublot number	16	Aggregate Mix Number

DIME Sample ID: 2022-08-31-58

DIME Test ID: 2022-08-31-58-4

Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2022-10-24

Input Type: Measured

Tester's full name: Ryan Kester

Date of test: 10/21/2022

Mass of saturated surface dry sample (before pycnometer) (S)	500.2 grams
Mass of the pycnometer with water and aggregate (C)	969.2 grams
Mass of the pycnometer with water (B)	662.2 grams
Mass of the oven dried sample (before pycnometer) (A)	485.9 grams
Mass of the saturated surface dry aggregate (for absorption) (S)	500.2 grams
Mass of the oven dry aggregate (for absorption) (A)	485.9 grams
Test Sample Preparation	Total Saturation
Bulk specific gravity	2.515
Bulk specific gravity (SSD Basis)	2.589
Apparent specific gravity	2.716
Absorption	2.9 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 10/24/2022 ✔