Summary for Test 2016-05-19-8-6
Test performed: CONCLP 3-16
Warning: The test results shown on this page have been superseded and are invalid.
This information is for reference only.
Project Information
| Project Identifiers | Project ID: 210756 DEA: 043G4034 EFIS: 0412000101 |
|---|---|
| DIST-CO-RTE-PM | 04-CC,SOL-80-13.4/14.1,0.0/0.6 |
| Award Date | 01/05/2016 |
| Closeout Date | 12/21/2017 |
| Work Description | RESURFACE BRIDGE , INSTALL NEW JOINT SEAL.. |
| Location Description | IN CONTRA COSTA AND SOLANO COUNTIESON THE CARQUINEZ BRIDGE (1958) |
| QA Service Level | 1 (Verified on 09/15/2015) |
Sample Information
| Sample Taken Date | 05/19/2016 | Sample Unique Key | 8 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 05/19/2016 | Sample type | Quality Control |
| A brief description of the sample | polyester resin | The quantity of what the sample constitutes | 40000 lbs |
| From where was the sample collected | Source | First name of sampler or witnessed by | Unknown |
| Last name of sampler or witnessed by | Unknown | Title of sampler | Unknown |
| Telephone number of sampler | Unknown | Laboratory sample identification | Unknown |
| Linked DIME Sample ID | Unknown | The fabricator/manufacturer/facility name | reichhold |
| Transportation Laboratory (TL) Number | c240494 | Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown |
| Structure unique identifier | Not set | Structure name | Not set |
| Bid Item | Not set |
Material Information
| Material Type | Polyester | Mfg. Lot Number(s) | 0000975313 |
|---|---|---|---|
| Batch Number | 0000975313 | Mix number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2016-05-19-8
DIME Test ID: 2016-05-19-8-6
Testing Lab: CT HQ - Sacramento Concrete Testing Laboratory
Test Method: CONCLP 3-16: Polyester Resin
Test Release Date: 2016-09-22
Test Results
Input Type: Measured
Tester's full name: Mike Mullins
Date of test: 09/22/2016
Viscosity ASTM D 2196, RVT, No. 1 spindle 75 to 200 cps @ 20 RPM, 77°F: 195 cps
Specific gravity ASTM D 1475 1.05 to 1.10 @ 77°F: 1.07
Conditioning (18/25/50 + 5/70) Elogation ASTM D 638, minimum 35%: 51.1 %
Tensile Strength ASTM D 638 Type 1 @ 0.45 in/min, minimum 2500 psi: 2953 psi
Styrene ASTM D 2369 40% to 50 %: 44 %
PCC - SSD bond strength CTM 551 500 psi minimun @ 24 hours: 470 psi
Static Volatile Emissions, SCAQMD 309-91, maximum loss 1.0 grams: 0.6 grams
General comments (publicly viewable) (Max 1000 characters): approved by J.Sagar
Test was verified on 9/22/2016 ✔
Warning: The test results shown on this page have been superseded and are invalid.
This information is for reference only.