Summary for Test 2022-10-14-24-2
Test performed: CTM 670-December 2013Project Information
| Project Identifiers | Project ID: 215057 DEA: 010F5304 EFIS: 0116000018 |
|---|---|
| DIST-CO-RTE-PM | 01-HUM-299,200-R1.8,R2.7 |
| Award Date | 09/02/2020 |
| Closeout Date | 09/21/2023 |
| Work Description | RAISE BRIDGE AND HMA PAVING |
| Location Description | HUMBOLDT COUNTY NEAR ARCATA AT ROUTE 200/299 SEPARATION |
| QA Service Level | 1 (Verified on 07/24/2020) |
Sample Information
| Sample Taken Date | 10/14/2022 | Sample Unique Key | 24 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 10/17/2022 | Sample type | Quality Assurance |
| A brief description of the sample | Zap Screwlok Type 2 Couplers | The quantity of what the sample constitutes | 150 Couplers |
| From where was the sample collected | Job Site | First name of sampler or witnessed by | Jarred |
| Last name of sampler or witnessed by | Burrows | Title of sampler | SR |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Camblin Steel | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM5 - Couplers | Production or Authorization Testing | Production Testing |
|---|---|---|---|
| Service or Ultimate | Service | Material Standard Code | ASTM A706 |
| Material Grade | 60 | Rebar Manufacturer | Vinton Steel |
| Coupler Manufacturer | BarSplice | Intermediate Assembler or Fabricator | |
| Rebar Size | #8 | Coupler Model | Zap Screwlok |
| Coating Standards | Uncoated | Shape of Rebar | Straight |
| Rebar Hoop Diameter | Rebar Hoop Fabricator | ||
| Coupler Component Heat/Lot Number(s) | MM20104043 | Rebar Heat Number(s) | 2211937 |
| Rebar Size 2 | Coupler Unique ID | SL-17-03 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2022-10-14-24
DIME Test ID: 2022-10-14-24-2
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Cyclical/Fatique Tensile with Slip)
Test Release Date: 2022-10-20
Test Results
Number of Samples Tested: 1
Input Type: Measured
Tester's full name: spaine
Date of test: 10/18/2022
UTM: 400kip
Temperature: 72.00 f
Halo ID:
| Num | Sample | Number of Cycles | Size | Mfg. Lot Number(s) | Slip (inch) | Area (sqin) | Peak Load (lbf) | Peak Stress (psi) | Comments | Tested By |
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 2 | No. 8/25mm | 2 | 0 | 0.79 | 75311 | 95330 | service splice | spaine |
General comments (publicly viewable) (Max 1000 characters): service splice
Test Graph
Source: Bluehill Data Point File
WARNING: position or load not found in data points imported from Instron machine.
Test was verified on 10/20/2022 ✔