DIME - Test Summary

Summary for Test 2022-09-19-12-2

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 993649 DEA: 081M0304 EFIS: 0821000062
DIST-CO-RTE-PM	08-RIV-177-0.0/27.0
Award Date	05/23/2022
Closeout Date	03/27/2023
Work Description	PLACE RUBBERIZED HMA, TRAFFIC STRIPING & COLD PLANE ASPHALT CONCRETE.
Location Description	RIVERSIDE COUNTY NEAR DESERT CENTER FROM ROUTE 10/177 SEPARATION TO ROUTE 62
QA Service Level	1 (Verified on 07/27/2022)

Sample Taken Date	09/19/2022	Sample Unique Key	12
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	09/21/2022
Sample type	Verification	A brief description of the sample	JMF 1/2" RHMA-G-SP 0.3% EVO
The quantity of what the sample constitutes	8 Bags Agg., 1 Bag MF	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	MM	Last name of sampler or witnessed by	QC
Title of sampler		Telephone number of sampler
Laboratory sample identification	0652G-22	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Martin Marietta -Coachella	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-33-0084
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number	41218180	A detailed description of where the material sample was collected	Belt Cut at Martin Marietta Coachella
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

DIME Sample ID: 2022-09-19-12

DIME Test ID: 2022-09-19-12-2

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2022-11-09

Input Type: Measured

Tester's full name: Amir Behjati

Date of test: 09/24/2022

Mass of saturated surface dry sample (before pycnometer) (S): 500 grams

Mass of the pycnometer with water and aggregate (C): 962.6 grams

Mass of the pycnometer with water (B): 653.3 grams

Mass of the oven dried sample (before pycnometer) (A): 495.6 grams

Mass of the saturated surface dry aggregate (for absorption) (S): 502.2 grams

Mass of the oven dry aggregate (for absorption) (A): 495.6 grams

Test Sample Preparation: 6% Moisture

Bulk specific gravity: 2.599

Bulk specific gravity (SSD Basis): 2.622

Apparent specific gravity: 2.660

Absorption: 0.9 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 11/9/2022 ✔