Summary for Test 2022-09-24-18-3
Test performed: CTM 389-19Project Information
| Project Identifiers | Project ID: 993505 DEA: 022J4404 EFIS: 0221000078 |
|---|---|
| DIST-CO-RTE-PM | 02-LAS-139-38.0/43.0 |
| Award Date | 03/07/2022 |
| Closeout Date | 05/24/2023 |
| Work Description | REPLACE AC SURFACING, ASPHALT RUBBER BINDER, SEAL COAT & HMA OVERLAY. |
| Location Description | LASSEN COUNTY ABOUT 37 MILES NORTH OF SUSANVILLE FROM 4.3 MILES NORTH OF SOUTH GRASSHOPPER ROAD TO 0. 2 MILE SOUTH OF TERMO GRASSHOPPER ROAD |
| QA Service Level | 1 (Verified on 01/18/2022) |
Sample Information
| Sample Taken Date | 09/24/2022 | Sample Unique Key | 18 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/29/2022 |
| Sample type | Department Acceptance | A brief description of the sample | 4 boxes of Lime Treated 1/2-inch Type A HMA (eq. PG 64-28 M) with 25.0% RAP and virgin PG 58-34 M binder from Albina (Klamath Falls, OR) |
| The quantity of what the sample constitutes | 10 000 Tons | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Joe | Last name of sampler or witnessed by | Delgado |
| Title of sampler | Consultant | Telephone number of sampler | |
| Laboratory sample identification | D79168 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Hat Creek Construction and Materials – Shaw Pit Facility (Lookout, CA) | Transportation Laboratory (TL) Number | 897865 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 1/2 inch | Lot number | |
| Sublot number | HMA Mix Number | Not set | |
| Binder content (%) | Not set | Virgin binder PG | Not set |
| Design binder PG | Not set | Binder Supplier | Not set |
| RAP content (%) | Not set | WMA Additives | Not set |
| Antistrip type | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2022-09-24-18
DIME Test ID: 2022-09-24-18-3
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt
Test Release Date: 2022-10-13
Test Results
Specified number of passes at 12.7 mm: 15000
Specimen Preparation Method:
Input Type: Measured
Tester's full name: Colt Sweeny
Date of test: 10/04/2022
Test Temperature: 122 F
Compaction Method: SGC Cylindrical Specimen
Air Void Content for specimen A-1: no data
Air Void Content for specimen A-2: no data
Air Void Content for specimen B-1: no data
Air Void Content for specimen B-2: no data
Stripping Inflection Point (Wheel A): >15000
Stripping Inflection Point (Wheel B): >15000
Maximum impression at 5000 passes (left wheel): 1.83 mm
Maximum impression at 5000 passes (right wheel): 1.85 mm
Average impression at 5000 passes (left/right avg): 1.84 mm
Maximum impression at 10000 passes (left wheel): 2.5 mm
Maximum impression at 10000 passes (right wheel): 3.17 mm
Average impression at 10000 passes (left/right avg): 2.84 mm
Maximum impression at 15000 passes (left wheel): 4.17 mm
Maximum impression at 15000 passes (right wheel): 4.43 mm
Average impression at 15000 passes (left/right avg): 4.3 mm
Maximum impression at 20000 passes (left wheel): no data mm
Maximum impression at 20000 passes (right wheel): no data mm
Average impression at 20000 passes (left/right avg): no data mm
Maximum impression at 25000 passes (left wheel): no data mm
Maximum impression at 25000 passes (right wheel): no data mm
Average impression at 25000 passes (left/right avg): no data mm
Raw Data: no data
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 10/13/2022 ✔