Summary for Test 2022-09-15-14-1
Test performed: ASTM F606-21Project Information
| Project Identifiers | Project ID: 214337 DEA: 080E33U4 EFIS: 0817000075 |
|---|---|
| DIST-CO-RTE-PM | 08-SBD-115-R7.3/R10.0 |
| Award Date | 04/26/2021 |
| Closeout Date | 06/09/2025 |
| Work Description | ADD WB AUX & EB DECEL LANES, WIDEN I15 SW CONNECT,RAMPS/BRDG |
| Location Description | SAN BERNARDINO COUNTY IN ONTARIO FROM 0.2 MILE WEST OF CUCAMONGA CREEK BRIDGE TO MILLIKEN AVENUE |
| QA Service Level | 1 (Verified on 06/23/2021) |
Sample Information
| Sample Taken Date | 09/15/2022 | Sample Unique Key | 14 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/19/2022 |
| Sample type | Quality Assurance | A brief description of the sample | 1/2" bolt assembly components |
| The quantity of what the sample constitutes | 2 Lots of 1/2" bolt Assy Components | From where was the sample collected | Fabricator |
| First name of sampler or witnessed by | Edward | Last name of sampler or witnessed by | Leach |
| Title of sampler | QAI | Telephone number of sampler | 7072903887 |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | St. Louis Screw & Bolt | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | S38-068-22 | Structure unique identifier | |
| Structure name | Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | TT0157729, TT0157731 |
|---|---|---|---|
| Heat Number(s) | 10771000, CR10525360-32 | Nut Mfg. Lot Number(s) | E931C2 |
| Washer Mfg. Lot Number(s) | 19228 Flat, 3650 Lock, G10451 Bevel | Bolt Specification | ASTM F3125, Grade A325 |
| Bolt Length(s) | 1-1/4", 2-3/4" | Nut Specification | ASTM A563, Grade DH |
| Washer Specification | ASTM F436-1 | Finish | ASTM A153, ASTM A153 |
| Diameter/Size | 1/2" (both) | Bolt Mfg. Lot Number | E499H1, 807489 |
| Rocap Test Requirement(s) | Yes | Lubricant Requirements(s) | Yes |
| Washer Inner Diameter(s) |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2022-09-15-14
DIME Test ID: 2022-09-15-14-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Test Release Date: 2022-10-17
Test Results
Number of Samples: 1
Input Type: Measured
Tester's full name:
Date of test: 10/10/2022
UTM: 450kip
Temperature: 72 f
| Num | Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Comments | Tested By |
|---|---|---|---|---|---|---|---|
| 1 | 1A | 23061 | Nut Proof Load |
General comments (publicly viewable) (Max 1000 characters): Nut Proof Load
Test Graph
Source: Bluehill Data Point File
WARNING: time or load not found in data points imported from Instron machine.
Test was verified on 10/17/2022 ✔