DIME - Test Summary

Summary for Test 2022-09-07-50-2

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 993418 DEA: 07324404 EFIS: 0716000077
DIST-CO-RTE-PM	07-LA-22-0.0/1.5
Award Date	02/18/2022
Closeout Date	09/24/2024
Work Description	PLACE RHMA-G AND MODIFY SIGNAL AND LIGHTING SYSTEM.
Location Description	LOS ANGELES COUNTY IN LONG BEACH FROM ROUTE 1 TO SAN GABRIEL RIVER UNDERCROSSING
QA Service Level	1 (Verified on 12/06/2021)

Sample Taken Date	09/07/2022	Sample Unique Key	50
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	09/13/2022
Sample type	Verification	A brief description of the sample	PSUE 3/4" RHMA-G-SP, 0.75% LAS
The quantity of what the sample constitutes	6 Bags Comned Coldfeed Agg., 2 Bags CRM	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Blue Diamond	Last name of sampler or witnessed by	QC
Title of sampler		Telephone number of sampler
Laboratory sample identification	0630G-22	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Blue Diamond Material-Irwindale	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-19-0052
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number	300072	A detailed description of where the material sample was collected	Belt Cut at Blue Diamond Irwindale Plant
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

DIME Sample ID: 2022-09-07-50

DIME Test ID: 2022-09-07-50-2

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2022-11-01

Input Type: Measured

Tester's full name: Friday Ofoegbu

Date of test: 09/15/2022

Mass of saturated surface dry sample (before pycnometer) (S): 500.0 grams

Mass of the pycnometer with water and aggregate (C): 965.3 grams

Mass of the pycnometer with water (B): 653.4 grams

Mass of the oven dried sample (before pycnometer) (A): 494.4 grams

Mass of the saturated surface dry aggregate (for absorption) (S): 500.0 grams

Mass of the oven dry aggregate (for absorption) (A): 494.4 grams

Test Sample Preparation: 6% Moisture

Bulk specific gravity: 2.628

Bulk specific gravity (SSD Basis): 2.658

Apparent specific gravity: 2.709

Absorption: 1.1 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 11/1/2022 ✔