Summary for Test 2022-08-16-43-10
Test performed: CTM 202-November 2011Project Information
Project Identifiers | Project ID: 993649 DEA: 081M0304 EFIS: 0821000062 |
---|---|
DIST-CO-RTE-PM | 08-RIV-177-0.0/27.0 |
Award Date | 05/23/2022 |
Closeout Date | 03/27/2023 |
Work Description | PLACE RUBBERIZED HMA, TRAFFIC STRIPING & COLD PLANE ASPHALT CONCRETE. |
Location Description | RIVERSIDE COUNTY NEAR DESERT CENTER FROM ROUTE 10/177 SEPARATION TO ROUTE 62 |
QA Service Level | 1 (Verified on 07/27/2022) |
Sample Information
Sample Taken Date | 08/16/2022 | Sample Unique Key | 43 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/24/2022 |
Sample type | Verification | A brief description of the sample | JMF 3/4" HMA-A-SP R24 0.4% Evo |
The quantity of what the sample constitutes | 8 Bags Bin Agg., 1 Bag Rap 1 Bag MF | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Martin | Last name of sampler or witnessed by | Marietta |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 0580A-22 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Martin Marietta-Coachella | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-33-0084 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | 42417105 | A detailed description of where the material sample was collected | Belt Cut at Martin Marietta Coachella |
Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 3/4 inch |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2022-08-16-43
DIME Test ID: 2022-08-16-43-10
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2022-09-22
Test Results
What size aggregate is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Calculated
Tester's full name: Angel Toledo/Robert Jarquin
Date of test: 08/26/2022
Cumulative percent passing the 3 in. sieve: 100 %
Cumulative percent passing the 2 1/2 in. sieve: 100 %
Cumulative percent passing the 2 in. sieve: 100 %
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 95 %
Cumulative percent passing the 1/2 in. sieve: 82 %
Cumulative percent passing the 3/8 in. sieve: 72 %
Cumulative percent passing the #4 sieve: 46 %
Cumulative percent passing the #8 sieve: 37 %
Cumulative percent passing the #16 sieve: 29 %
Cumulative percent passing the #30 sieve: 21 %
Cumulative percent passing the #50 sieve: 14 %
Cumulative percent passing the #100 sieve: 8 %
Cumulative percent passing the #200 sieve: 5.1 %
General comments (publicly viewable) (Max 1000 characters): Combined Aggregate Gradation W/Rap Gradation Correlation Factors
Test was verified on 9/22/2022 ✔