DIME - Test Summary

Summary for Test 2022-08-16-43-2

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 993649 DEA: 081M0304 EFIS: 0821000062
DIST-CO-RTE-PM	08-RIV-177-0.0/27.0
Award Date	05/23/2022
Closeout Date	03/27/2023
Work Description	PLACE RUBBERIZED HMA, TRAFFIC STRIPING & COLD PLANE ASPHALT CONCRETE.
Location Description	RIVERSIDE COUNTY NEAR DESERT CENTER FROM ROUTE 10/177 SEPARATION TO ROUTE 62
QA Service Level	1 (Verified on 07/27/2022)

Sample Taken Date	08/16/2022	Sample Unique Key	43
Date that the sample was received by the laboratory/organization performing the testing	08/24/2022	Sample type	Verification
A brief description of the sample	JMF 3/4" HMA-A-SP R24 0.4% Evo	The quantity of what the sample constitutes	8 Bags Bin Agg., 1 Bag Rap 1 Bag MF
From where was the sample collected	Manufacturer	First name of sampler or witnessed by	Martin
Last name of sampler or witnessed by	Marietta	Title of sampler
Telephone number of sampler		Laboratory sample identification	0580A-22
Linked DIME Sample ID		The fabricator/manufacturer/facility name	Martin Marietta-Coachella
Transportation Laboratory (TL) Number		Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier		Structure name
Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-33-0084
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number	42417105	A detailed description of where the material sample was collected	Belt Cut at Martin Marietta Coachella
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

DIME Sample ID: 2022-08-16-43

DIME Test ID: 2022-08-16-43-2

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2022-09-22

Input Type: Measured

Tester's full name: Friday Ofoegbu

Date of test: 08/27/2022

Mass of saturated surface dry sample (before pycnometer) (S)	500.0 grams
Mass of the pycnometer with water and aggregate (C)	977.7 grams
Mass of the pycnometer with water (B)	663.7 grams
Mass of the oven dried sample (before pycnometer) (A)	497.3 grams
Mass of the saturated surface dry aggregate (for absorption) (S)	500.0 grams
Mass of the oven dry aggregate (for absorption) (A)	497.3 grams
Test Sample Preparation	6% Moisture
Bulk specific gravity	2.674
Bulk specific gravity (SSD Basis)	2.688
Apparent specific gravity	2.713
Absorption	0.5 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 9/22/2022 ✔