Summary for Test 2022-08-16-8-14
Test performed: ASME B1.2-83r17Project Information
| Project Identifiers | Project ID: 208973 DEA: 120H1004 EFIS: 1200000180 COOP: 120670 |
|---|---|
| DIST-CO-RTE-PM | 12-ORA-405,73,405,605-9.3/24.3 |
| Award Date | 11/07/2016 |
| Closeout Date | Not set |
| Work Description | (Alternative Delivery) San Diego Freeway (I-405) Improvement Project SR-73 to I-605, Design Build Project, Administered by Orange County Transportation Authority, Caltrans METS to perform Source Inspection per RFP. |
| Location Description | Orange and Los Angeles Counties: 12-ORA-405 PM 9.3/24.2 / 07-LA-405 PM 0.0/1.2 12-ORA-22 PM R0.7/R3.8 / 12-ORA-22 PM R0.5/R0.7 12-ORA-73 PM R27.2/R27.8 / 12-ORA-605 PM 3.5/R1.6 07-LA-605 PM R0.0/R1.2 |
| QA Service Level | 1 (Verified on 09/10/2015) |
Sample Information
| Sample Taken Date | 08/16/2022 | Sample Unique Key | 8 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 08/18/2022 | Sample type | Quality Assurance |
| A brief description of the sample | 24" threaded rods | The quantity of what the sample constitutes | 312 threaded rods |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | Andrew |
| Last name of sampler or witnessed by | Webster | Title of sampler | CALTRANS METS QA INSPECTOR |
| Telephone number of sampler | 9254189838 | Laboratory sample identification | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | KS Fabrication and Machine | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | L154-092-22 | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | |
|---|---|---|---|
| Heat Number(s) | Bolt - 5393485, Nut - 212402 | Nut Mfg. Lot Number(s) | 34745-212402 |
| Washer Mfg. Lot Number(s) | Bolt Specification | ASTM F1554 | |
| Bolt Length(s) | 24" | Nut Specification | ASTM A194 |
| Washer Specification | na | Finish | ASTM F2329 - Hot Dip Galv |
| Diameter/Size | 1-1/4" | Bolt Mfg. Lot Number | 2201172-14A |
| Rocap Test Requirement(s) | Lubricant Requirements(s) | ||
| Washer Inner Diameter(s) | Bolt Mill Supplier | Not set | |
| Nut Mill Supplier | Not set | Washer Mill Supplier | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2022-08-16-8
DIME Test ID: 2022-08-16-8-14
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Test Release Date: 2022-09-01
Test Results
Input Type: Calculated
Tester's full name: Steven Paine
Date of test: 08/26/2022
Sample No.: 1E
Rocap Number: no data
Heat Number(s): no data
Mfg. Lot Number: 34745-212402
Finish Coating: ASTM F2329 - Hot Dip
Product Markings: 2HZN U
Size: 1.25 in
Gage Type: Pass
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 9/1/2022 ✔