Summary for Test 2022-08-18-61-3
Test performed: AASHTO T30-19Project Information
| Project Identifiers | Project ID: 215367 DEA: 021J4904 EFIS: 0220000084 |
|---|---|
| DIST-CO-RTE-PM | 02-TEH-32-14.0/20.0 |
| Award Date | 02/02/2021 |
| Closeout Date | 04/11/2024 |
| Work Description | PLACE HOT MIX ASPHALT (TYPE A). |
| Location Description | TEHAMA COUNTY ABOUT 28 MILES EAST OF FOREST RANCH FROM 1.1 MILES EAST OF DEER CREEK BRIDGE NO. 08-0068 TO 0.4 MILE WEST OF SLATE CREEK BRIDGE NO. 08-0154 |
| QA Service Level | 1 (Verified on 12/24/2020) |
Sample Information
| Sample Taken Date | 08/18/2022 | Sample Unique Key | 61 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/19/2022 |
| Sample type | Department Acceptance | A brief description of the sample | 2 bags of Combined RAP (3/8-inch) |
| The quantity of what the sample constitutes | Production Start-Up Evaluation/JMF Verification | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | PEI | Last name of sampler or witnessed by | . |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | D79134B | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Dig It Construction – Sierra Cascade Aggregate and Asphalt Products (Chester, CA) | Transportation Laboratory (TL) Number | 876982 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Reclaimed Asphalt Pavement | RAP Source | Combined RAP from Sierra Cascade |
|---|---|---|---|
| Aggregate Size | 3/8-inch | Aggregate Source | |
| RAP Stockpile | Static | Stockpile Size (tons) | |
| Reclaimed Asphalt Pavement Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2022-08-18-61
DIME Test ID: 2022-08-18-61-3
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)
Test Release Date: 2022-08-26
Test Results
Does this test use 1/4 sieve?: Yes
Is an aggregate correction factor used?: No
Input Type: Measured
Tester's full name: Khue Yang
Date of test: 08/23/2022
| Cumulative Mass Retained | Cumulative Percent Passing | |||||
|---|---|---|---|---|---|---|
| 1447.2 grams | ||||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 3.4 grams | 99.8 % | |||||
| 53.2 grams | 96.3 % | |||||
| 312.6 grams | 78.4 % | |||||
| 463.8 grams | 68 % | |||||
| 765.3 grams | 47.1 % | |||||
| 944.9 grams | 34.7 % | |||||
| 1063.5 grams | 26.5 % | |||||
| 1160.5 grams | 19.8 % | |||||
| 1238.7 grams | 14.4 % | |||||
| 1291.5 grams | 10.8 % | |||||
General comments (publicly viewable) (Max 1000 characters): Uncorrected
Test was verified on 8/26/2022 ✔