Summary for Test 2022-08-08-49-3
Test performed: ASTM D412-16r21Project Information
| Project Identifiers | Project ID: 993183 DEA: 031H2704 EFIS: 0316000082 |
|---|---|
| DIST-CO-RTE-PM | 03-YUB-70-R11.2/13.5 |
| Award Date | 10/14/2021 |
| Closeout Date | Not set |
| Work Description | UPGRADE BRIDGE RAILS & CONSTRUCT CONCRETE MEDIAN BARRIER. |
| Location Description | YUBA COUNTY NEAR LINDA AND MARYSVILLE FROM 2.4 MILES SOUTH OF FEATHER RIVER BOULEVARD UNDERCROSSING TO THE YUBA RIVER BRIDGE AND OVERHEAD |
| QA Service Level | 1 (Verified on 08/16/2021) |
Sample Information
| Sample Taken Date | 08/08/2022 | Sample Unique Key | 49 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 08/10/2022 | Sample type | Quality Assurance |
| A brief description of the sample | Joint Seal | The quantity of what the sample constitutes | 1 |
| From where was the sample collected | Job Site | First name of sampler or witnessed by | Kaveh |
| Last name of sampler or witnessed by | Aladini | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Watson Bowman | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM2 - Type B Elastomeric Joint Seal | Mfg. Lot Number(s) | I0HSA |
|---|---|---|---|
| Manufacturer(s) | Watson Bowman | Temperature | 72 |
| Humidity | 50 | Comments | |
| Joint Seal Size | 1.75 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2022-08-08-49
DIME Test ID: 2022-08-08-49-3
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM D412-16r21: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
Test Release Date: 2022-09-06
Test Results
Number of specimens tested: 3
Unit of the Ultimate Tensile Values: psi
Input Type: Calculated
Tester's full name: rmacias
Date of test: 08/23/2022
UTM: 2kip
Humidity: 50.00 %
Temperature: 72 F
Sample 1 Median Thickness: 0.053
Sample 1 Thickness all Within 0.003 inch?: Yes
Sample 1 Ultimate Tensile: 2058.59
Sample 1 Elongation (350% Min): Pass
Sample 2 Median Thickness: 0.06
Sample 2 Thickness all Within 0.003 inch?: Yes
Sample 2 Ultimate Tensile: 2043.74
Sample 2 Elongation (350% Min): Pass
Sample 3 Median Thickness: 0.058
Sample 3 Thickness all Within 0.003 inch?: Yes
Sample 3 Ultimate Tensile: 2045.06
Sample 3 Elongation (350% Min): Pass
Median of the Ultimate Tensile Values: 2045.1 psi
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Source: Bluehill Data Point FileTest graph for Sample 2
Source: Bluehill Data Point File
Test graph for Sample 3
Source: Bluehill Data Point File
Test graph for Sample 1
Test was verified on 9/6/2022 ✔