Summary for Test 2022-07-11-80-1

Test performed: AASHTO T27-14

Project Information

Project IdentifiersProject ID: 993345
DEA: 022J4004
EFIS: 0221000074
DIST-CO-RTE-PM02-LAS-395-56.5/R61.1
Award Date02/02/2022
Closeout Date11/23/2022
Work DescriptionCOLD PLANE ASPHALT CONCRETE PAVEMENT AND PLACE HMA.
Location DescriptionLASSEN COUNTY NEAR JANESVILLE FROM 0.1 MILE NORTH OF SUNNYSIDE ROAD TO 0.1 MILE NORTH OF ROUTE 36
QA Service Level1 (Verified on 11/01/2021)

Sample Information

Sample Taken Date07/11/2022 Sample Unique Key80
Date that the sample was received by the laboratory/organization performing the testing07/14/2022 Sample typeDepartment Acceptance
A brief description of the sample3 bags of Untreated Washed Dust Sized Virgin Aggregate The quantity of what the sample constitutesProduction Start-Up Evaluation
From where was the sample collectedManufacturer First name of sampler or witnessed byCGI
Last name of sampler or witnessed by. Title of samplerConsultant
Telephone number of sampler Laboratory sample identificationD79090D
Linked DIME Sample ID The fabricator/manufacturer/facility nameHat Creek Construction and Materials – Ward Lake Pit (Litchfield, CA)
Transportation Laboratory (TL) Number894728 Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier Structure name
Bid ItemNot set

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-18-0008::Ward Lake Pit
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedUntreated Sized Virgin Aggregate Stockpile
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Sizefine
The concrete mix design number Lot number
Sublot number Aggregate Mix NumberNot set

Test Details

DIME Sample ID: 2022-07-11-80
DIME Test ID: 2022-07-11-80-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2022-08-15

Test Results


What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Has the fine aggregate sample been reduced?: No
Input Type: Measured
Tester's full name: Khue Yang
Date of test: 07/18/2022
Cumulative Mass RetainedCumulative Percent Passing
1038.9 grams
grams %
0.0 grams100 %
0.0 grams100 %
0.0 grams100 %
9.7 grams99.1 %
19.5 grams98.1 %
191.4 grams81.6 %
376.3 grams63.8 %
209.6 grams37.5 %
329.3 grams22.6 %
403.2 grams13.3 %
449.1 grams7.6 %
479.4 grams3.8 %
491.7 grams2.22 %
grams
General comments (publicly viewable) (Max 1000 characters): Coarser on the № 4 – 50 sieves than the design.

Test was verified on 8/15/2022 ✔