DIME - Test Summary

Summary for Test 2022-08-08-27-1

Test performed: CTM 202-November 2011

Sample Taken Date	08/08/2022	Sample Unique Key	27
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	08/09/2022
Sample type	Department Acceptance	A brief description of the sample	1 bag of Fine Concrete Sand
The quantity of what the sample constitutes	.	From where was the sample collected	Source
First name of sampler or witnessed by	Danny	Last name of sampler or witnessed by	Hansen
Title of sampler	Consultant	Telephone number of sampler
Laboratory sample identification	D79120B	Linked DIME Sample ID	2022-08-08-26
The fabricator/manufacturer/facility name	Moore's Sand and Gravel	Transportation Laboratory (TL) Number	891185
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-47-0014::Moores Gravel
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Stockpile
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	fine
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

DIME Sample ID: 2022-08-08-27

DIME Test ID: 2022-08-08-27-1

Testing Lab: CT D02 - Redding Northern Regional Laboratory

Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates

Test Release Date: 2022-08-12

What size aggregate is being tested?: Fine Aggregate

Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained

For Combined Gradation only, has the fine aggregate sample been reduced?: No

For Combined Gradation only, use #40 Sieve?: No

Input Type: Measured

Tester's full name: Arthur Mills

Date of test: 08/09/2022

Sieve Size	Cumulative Mass Retained	Cumulative Percent Passing
Total mass of material in the sample	511.5 grams
3/8 in. sieve	0.0 grams	100 %
#4 sieve	0.0 grams	100 %
#8 sieve	55.1 grams	89 %
#16 sieve	199.8 grams	61 %
#30 sieve	321.4 grams	37 %
#50 sieve	404.4 grams	21 %
#100 sieve	456.6 grams	11 %
#200 sieve	484.8 grams	5 %
Cumulative mass retained on the pan	511.5 grams

General comments (publicly viewable) (Max 1000 characters): No. 16 x 30 = 24%, No. 30 x 50 = 16%, Target values were not provided.

Test was verified on 8/12/2022 ✔