DIME - Test Summary

Summary for Test 2016-07-16-1-1

Test performed: ASTM A370-15

Project Identifiers	Project ID: 3807 DEA: 07121844 EFIS: 0700000117
DIST-CO-RTE-PM	07-LA-5-42.8/47.3
Award Date	12/06/2010
Closeout Date	06/30/2021
Work Description	CONSTRUCT HOV LANES, RETAINING WALLS AND SOUND WALLS.
Location Description	LOS ANGELES COUNTY IN LOS ANGELES, GLENDALE, AND BURBANK FROM ROUTE 5/134 SEPARATION TO MAGNOLIA BOULEVARD OVERCROSSING
QA Service Level	1 (Verified on 02/23/2012)

Sample Taken Date	07/16/2016	Sample Unique Key	1
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	07/26/2016
Sample type	Quality Assurance	A brief description of the sample	Check Sample Plates
The quantity of what the sample constitutes	12	From where was the sample collected	Fabricator
First name of sampler or witnessed by	Russel	Last name of sampler or witnessed by	Lynch
Title of sampler	Unknown	Telephone number of sampler	Unknown
Laboratory sample identification	Unknown	Linked DIME Sample ID	Unknown
The fabricator/manufacturer/facility name	Stinger Bridge Iron	Transportation Laboratory (TL) Number	C952637 thru C952648
Inspector Lot Number from the Transportation Laboratory (TL) Form	L9607216	Structure unique identifier	Not set
Structure name	Not set	Bid Item	Not set

Material Type	SMTL TM6 - Steel Check Sample Plate	Heat Number(s)	2U133-403, 2U025-902, 2U036-503, 2U229-203, 2
Material Specification	A709	Grade	50
Thickness	.5in .625in 1in 1.25in	Shape	Square
Metal Foundry Manufacturer (Mill)	EVRAZ	Plate Dimension	12in x 12in

DIME Sample ID: 2016-07-16-1

DIME Test ID: 2016-07-16-1-1

Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory

Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)

Test Release Date: 2016-08-09

Number of Samples: 24

Input Type: Calculated

Tester's full name: Brian

Date of test: 08/03/2016

UTM: 67KIP

Temperature: 72 F

Num	Heat Number	Diameter (in)	Area (sqin)	Stress at Offset (psi)	Tensile Strength (psi)	Elongation in 4 x d (%)	Tested By
1	2U229	0.495	0.1924	53532	73440	29.6	Brian
2	2T740	0.497	0.194	65005	76780	30.3	Brian
3	2U059	0.495	0.1924	55828	72410	29.3	Brian
4	2U059	0.496	0.1932	55315	72860	29.3	Brian
5	2T923	0.501	0.1971	68145	84740	27.3	Brian
6	2T923	0.493	0.1909	71835	85380	22.4	Brian
7	2T952	0.497	0.194	68200	82650	26.8	Brian
8	2T952	0.498	0.1948	67419	82430	24.6	Brian
9	2U025	0.495	0.1924	59487	81500	27.5	Brian
10	2U025	0.498	0.1948	59379	81270	28.5	Brian
11	2U036	0.493	0.1909	54337	74060	29.6	Brian
12	2U229	0.494	0.1917	53662	73280	29.6	Brian
13	2U036	0.495	0.1924	54508	73970	31.6	Brian
14	2U024	0.497	0.194	54672	76480	28.3	Brian
15	2U024	0.495	0.1924	55051	76780	29	Brian
16	2T276	0.346	0.094	67066	83320	27.9	Brian
17	2T276	0.347	0.0946	67084	83450	23.1	Brian
18	2U133	0.497	0.194	54617	76500	27.1	Brian
19	2U133	0.497	0.194	54112	76590	27.5	Brian
20	2U230	0.496	0.1932	54128	73920	29.8	Brian
21	2U230	0.494	0.1917	53598	74040	31	Brian
22	2U134	0.497	0.194	63297	75900	30.5	Brian
23	2U134	0.499	0.1956	62434	76050	30.5	Brian
24	2T740	0.496	0.1932	66252	76630	30.4	Brian

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 8/9/2016 ✔