Summary for Test 2022-06-16-34-3
Test performed: AASHTO T315-20Project Information
| Project Identifiers | Project ID: 993603 DEA: 051N7004 EFIS: 0521000081 |
|---|---|
| DIST-CO-RTE-PM | 05-SLO-166-16.0/21.0 |
| Award Date | 04/22/2022 |
| Closeout Date | 03/28/2023 |
| Work Description | PARTIAL DEPTH RECYCLING AND OVERLAY WITH RHMA (GAP GRADED). |
| Location Description | SAN LUIS OBISPO COUNTY ABOUT 8 MILES EAST OF SANTA MARIA FROM 0.5 MILE WEST OF HUASNA RIVER BRIDGE TO 1.9 MILES WEST OF CUYAMA RIVER BRIDGE. |
| QA Service Level | 1 (Verified on 03/28/2022) |
Sample Information
| Sample Taken Date | 06/16/2022 | Sample Unique Key | 34 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/24/2022 |
| Sample type | Department Acceptance | A brief description of the sample | 3/4 hma-g w/ LIME PG64-10 |
| The quantity of what the sample constitutes | 1 Can | From where was the sample collected | Source |
| First name of sampler or witnessed by | _ | Last name of sampler or witnessed by | Papich |
| Title of sampler | QC | Telephone number of sampler | |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Sierra Pacific Materials | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Asphalt Binder | Performance Grade | PG 64-10 |
|---|---|---|---|
| Modified | No | Lot number | |
| Sublot number | Tank number | ||
| Time of sample | HMA Supplier | ||
| Certified Asphalt Supplier | San Joaquin Refinery - Bakersfield CA | Multigrade | No |
| Multigrade Type | Asphalt Binder Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2022-06-16-34
DIME Test ID: 2022-06-16-34-3
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2022-07-06
Test Results
Phase: PAV residue
Input Type: Measured
Tester's full name: Eva Torres
Date of test: 06/30/2022
Test Plate Diameter: 8 mm
Test Gap: 2 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 1.00 %
Stress Amplitude: 36.390 kPa
Phase Angle (δ) (for the 10 cycles): 66.6 degree
Complex Modulus (G*) (for the 10 measurements): 3639.053 kPa
Test Temperature (Specimen 1): 31.0 C
(G*) x sin(δ)=: 3340 kPa
General comments (publicly viewable) (Max 1000 characters): pav
Test was verified on 7/6/2022 ✔