Summary for Test 2022-06-02-45-2
Test performed: ASTM D638-Dec14Project Information
| Project Identifiers | Project ID: 993334 DEA: 051M3704 EFIS: 0519000130 |
|---|---|
| DIST-CO-RTE-PM | 05-SB-154-23.8/29.2 |
| Award Date | 12/17/2021 |
| Closeout Date | 10/20/2022 |
| Work Description | COLD PLANE EXISTING PAVEMENT, PLACE HMA-A AND HFST OVERLAY. |
| Location Description | SANTA BARBARA COUNTY NEAR SANTA BARBARA AT VARIOUS LOCATIONS FROM 0.4 MILE EAST OF STAGECOACH ROAD TO 0.8 MILE WEST OF SAN ANTONIO CREEK ROAD |
| QA Service Level | 1 (Verified on 11/16/2021) |
Sample Information
| Sample Taken Date | 06/02/2022 | Sample Unique Key | 45 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/14/2022 |
| Sample type | Quality Assurance | A brief description of the sample | 1 gallon can |
| The quantity of what the sample constitutes | 2 tankers | From where was the sample collected | Source |
| First name of sampler or witnessed by | Gilberto | Last name of sampler or witnessed by | Gonzalez |
| Title of sampler | QC Manager | Telephone number of sampler | 707-624-5467 |
| Laboratory sample identification | 943114 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Kwik Bond Polymers, Benicia | Transportation Laboratory (TL) Number | C943114 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | High Friction Surface Treatment | Mgf. Lot Number(s) | 1408528 |
|---|---|---|---|
| Batch Number | 1408528 | Mix Number | 1408528 |
| Resin Binder Type | Polyester | Used for Overlay | No |
| Used for Inlay | No |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2022-06-02-45
DIME Test ID: 2022-06-02-45-2
Testing Lab: CT HQ - Sacramento Concrete Testing Laboratory
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Test Release Date: 2022-06-30
Test Results
Number of specimens tested: 6
Input Type: Measured
Tester's full name: Kelly Potterf
Date of test: 06/09/2022
Conditioning procedure: 18/25/50+5/70
Speed of testing: 0.45 in/min
Sample 1 Width: 0.143 in
Sample 1 Thickness: 0.492 in
Sample 1 Area: 0.0704 in^2
Sample 1 Ultimate Strength Actual: 254 lbs
Sample 1 percent elongation: 63.4 %
Sample 1 Time: 0 MM:SS
Sample 2 Width: 0.15 in
Sample 2 Thickness: 0.492 in
Sample 2 Area: 0.0738 in^2
Sample 2 Ultimate Strength Actual: 279.7 lbs
Sample 2 percent elongation: 65.5 %
Sample 2 Time: 0 MM:SS
Sample 3 Width: 0.141 in
Sample 3 Thickness: 0.491 in
Sample 3 Area: 0.0692 in^2
Sample 3 Ultimate Strength Actual: 205.8 lbs
Sample 3 percent elongation: 38.7 %
Sample 3 Time: 0 MM:SS
Sample 4 Width: 0.146 in
Sample 4 Thickness: 0.487 in
Sample 4 Area: 0.0711 in^2
Sample 4 Ultimate Strength Actual: 262.7 lbs
Sample 4 percent elongation: 64.6 %
Sample 4 Time: 0 MM:SS
Sample 5 Width: 0.147 in
Sample 5 Thickness: 0.493 in
Sample 5 Area: 0.0725 in^2
Sample 5 Ultimate Strength Actual: 254.3 lbs
Sample 5 percent elongation: 59.7 %
Sample 5 Time: 0 MM:SS
Sample 6 Width: 0.134 in
Sample 6 Thickness: 0.486 in
Sample 6 Area: 0.0651 in^2
Sample 6 Ultimate Strength Actual: 232 lbs
Sample 6 percent elongation: 59.7 %
Sample 6 Time: 0 MM:SS
Sample 1 Ultimate strength: 3608 psi
Sample 2 Ultimate strength : 3790 psi
Sample 3 Ultimate strength: 2974 psi
Sample 4 Ultimate strength: 3694.8 psi
Sample 5 Ultimate strength: 3507.6 psi
Sample 6 Ultimate strength : 3563.7 psi
Ultimate Strength Average: 3523 psi
Percent Elongation Average: 59 %
General comments (publicly viewable) (Max 1000 characters): Accepted vendor's results.
Test was verified on 6/30/2022 ✔