Summary for Test 2020-11-18-14-4
Test performed: AASHTO T209-12
Warning: The test results shown on this page have been superseded and are invalid.
This information is for reference only.
Please click this
link
to view the corrected test.
Project Information
| Project Identifiers | Project ID: 99999 DEA: 0322222 |
|---|---|
| DIST-CO-RTE-PM | 03-SAC,OMG-888,99,80-0.6-0.6 |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES. |
| Location Description | THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES. |
| QA Service Level | (Verified on 04/05/2013) |
Sample Information
| Sample Taken Date | 11/18/2020 | Sample Unique Key | 14 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 11/20/2020 |
| Sample type | Quality Assurance | A brief description of the sample | Folsom Blvd HMA |
| The quantity of what the sample constitutes | 20 lbs | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Jim | Last name of sampler or witnessed by | Sample |
| Title of sampler | MREA | Telephone number of sampler | 9162270000 |
| Laboratory sample identification | 99999-HMA1 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | All American Asphalt | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | RHMA-G |
|---|---|---|---|
| HMA Grading | 3/8 inch | Lot number | 12 |
| Sublot number | 1 | HMA Mix Number | |
| Binder content (%) | Not set | Virgin binder PG | Not set |
| Design binder PG | Not set | Binder Supplier | Not set |
| RAP content (%) | Not set | WMA Additives | Not set |
| Antistrip type | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2020-11-18-14
DIME Test ID: 2020-11-18-14-4
Testing Lab: CT HQ - Sacramento Materials Management Branch Field Office
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Test Release Date: 2022-06-15
Test Results
Number of tests: 2
What is the unit of measurement for theoretical density?: US Units
Mass Determination: Air
Input Type: Measured
Tester's full name: David Phong
Date of test: 02/03/2021
Method Performed: no data
Mass of container filled with water: 12 grams
Mass of oven-dry sample in air for Sample 1: 14 grams
Mass of container filled with the sample and water for Sample 1: 15.2 grams
Mass of container filled with water: 12.5
Mass of oven-dry sample in air for Sample 2: 15.2 grams
Mass of container filled with the sample and water for Sample 2: 4.7 grams
Temperature of Water: 45 °F
Specific Gravity for Sample 1: 1.302
Specific Gravity for Sample 2: 0.659
Average Specific Gravity: 0.981
Theoretical maximum density at 25°C (77°F): no data
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 6/15/2022 ✔
Warning: The test results shown on this page have been superseded and are invalid.
This information is for reference only.