Summary for Test 2022-06-07-19-1
Test performed: AASHTO T308-10Project Information
| Project Identifiers | Project ID: 215257 DEA: 11056374 EFIS: 1117000087 |
|---|---|
| DIST-CO-RTE-PM | 11-SD-11-0.6/2.7 |
| Award Date | 02/16/2021 |
| Closeout Date | Not set |
| Work Description | CONSTRUCT INTERCHANGE, PLACE JPCP, HMA, AND INSTALL LIGHTING. |
| Location Description | SAN DIEGO COUNTY NEAR SAN DIEGO FROM 0.2 MILE WEST OF SANYO AVENUE UNDERCROSSING TO 1.2 MILE EAST OF ENRICO FERMI DRIVE OVERCROSSING |
| QA Service Level | 1 (Verified on 11/25/2020) |
Sample Information
| Sample Taken Date | 06/07/2022 | Sample Unique Key | 19 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 06/07/2022 | Sample type | Quality Assurance |
| A brief description of the sample | 1/2" RHMA-G | The quantity of what the sample constitutes | 2 bags, 12 boxes |
| From where was the sample collected | Source | First name of sampler or witnessed by | David |
| Last name of sampler or witnessed by | Walker | Title of sampler | |
| Telephone number of sampler | 8582480978 | Laboratory sample identification | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | CCA Lakeside | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | RHMA-G |
|---|---|---|---|
| HMA Grading | 1/2 inch | Lot number | |
| Sublot number | HMA Mix Number | Not set | |
| Binder content (%) | Not set | Virgin binder PG | Not set |
| Design binder PG | Not set | Binder Supplier | Not set |
| RAP content (%) | Not set | WMA Additives | Not set |
| Antistrip type | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2022-06-07-19
DIME Test ID: 2022-06-07-19-1
Testing Lab: CT D11 - District 11 Materials Laboratory
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Test Release Date: 2024-08-29
Test Results
What temperature unit is used?: Fahrenheit
Input Type: Measured
Tester's full name: Daniel Smith
Date of test: 06/09/2022
Test procedure used?: Method A
Mass of the specimen basket assembly: no data
Mass of the specimen and specimen basket assembly prior to ignition: no data
Mass of HMA Sample prior to ignition: 1546.5 g
Mass Loss: no data
Mass of aggregate remaining after ignition: 1422.4 g
Correction Factor (Percent by mass of HMA Specimen): 0.20 %
Moisture Content: 0.00 %
Temperature Compensation Factor: no data
Test Temperature: 538 F
Corrected Asphalt Binder Content: 7.82 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 8/29/2024 ✔