Summary for Test 2022-05-04-36-1
Test performed: AASHTO T27-14Project Information
| Project Identifiers | Project ID: 993310 DEA: 020J3804 EFIS: 0219000111 |
|---|---|
| DIST-CO-RTE-PM | 02-LAS-36-R20.5/22.8 |
| Award Date | 02/04/2022 |
| Closeout Date | 08/11/2023 |
| Work Description | EXPAND EXISTING BRAKE CHECK AREA AND HMA PAVING. |
| Location Description | LASSEN COUNTY NEAR SUSANVILLE AT 1.3 MILES EAST OF ROUTE 44 AND FROM 0.1 MILE EAST OF EAGLE LAKE ROAD TO 1.3 MILES WEST OF HARRIS DRIVE |
| QA Service Level | 1 (Verified on 10/18/2021) |
Sample Information
| Sample Taken Date | 05/04/2022 | Sample Unique Key | 36 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/05/2022 |
| Sample type | Department Acceptance | A brief description of the sample | Washed Dust Sized Untreated Virgin Aggregate |
| The quantity of what the sample constitutes | JMF Verification | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | CGI | Last name of sampler or witnessed by | . |
| Title of sampler | Consultant | Telephone number of sampler | |
| Laboratory sample identification | D79025 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Hat Creek Construction, Ward Lake Plant, Litchfield, CA | Transportation Laboratory (TL) Number | 898178 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-18-0008 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Plant | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/4 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2022-05-04-36
DIME Test ID: 2022-05-04-36-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2022-06-16
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Has the fine aggregate sample been reduced?: No
Input Type: Measured
Tester's full name: Khue Yang
Date of test: 05/09/2022
| Cumulative Mass Retained | Cumulative Percent Passing | |||||
|---|---|---|---|---|---|---|
| 1851.4 grams | ||||||
| grams | % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.6 grams | 100 % | |||||
| 50.9 grams | 97.3 % | |||||
| 250.9 grams | 86.4 % | |||||
| 208.2 grams | 49.9 % | |||||
| 332.4 grams | 28.2 % | |||||
| 403.8 grams | 15.7 % | |||||
| 447.3 grams | 8.1 % | |||||
| 473.5 grams | 3.5 % | |||||
| 482.8 grams | 1.86 % | |||||
| grams | ||||||
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 6/16/2022 ✔