DIME - Test Summary

Summary for Test 2022-04-19-21-2

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 214524 DEA: 07304504 EFIS: 0714000067
DIST-CO-RTE-PM	07-LA-57-R0.0/R4.5
Award Date	06/11/2020
Closeout Date	04/03/2025
Work Description	CONCRETE PAVEMENT, CONCRETE BARRIER, AND ELECTRICAL WORK.
Location Description	LOS ANGELES COUNTY IN DIAMOND BAR AND CITY OF INDUSTRY FROM ORANGE COUNTY LINE TO ROUTE 57/60 SEPARATION
QA Service Level	1 (Verified on 08/12/2020)

Sample Taken Date	04/19/2022	Sample Unique Key	21
Date that the sample was received by the laboratory/organization performing the testing	04/21/2022	Sample type	Verification
A brief description of the sample	PSUE 3/4" RHMA-G-SP 0.50% LAS	The quantity of what the sample constitutes	4 Bags Belt Cut Agg, 1 Bag Hi-Nat, 1 Bag CRM
From where was the sample collected	Manufacturer	First name of sampler or witnessed by	Victor
Last name of sampler or witnessed by	Pham	Title of sampler
Telephone number of sampler		Laboratory sample identification	0242G-22
Linked DIME Sample ID		The fabricator/manufacturer/facility name	Victor Materials-Irwindale
Transportation Laboratory (TL) Number		Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier		Structure name
Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-33-0027
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number	226108A IRW LTR	A detailed description of where the material sample was collected	Belt Cut at Vulcan Materials-Irwindale
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

DIME Sample ID: 2022-04-19-21

DIME Test ID: 2022-04-19-21-2

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2022-06-01

Input Type: Measured

Tester's full name: Friday Ofoegbu

Date of test: 04/24/2022

Mass of saturated surface dry sample (before pycnometer) (S)	500.0 grams
Mass of the pycnometer with water and aggregate (C)	978.7 grams
Mass of the pycnometer with water (B)	663.7 grams
Mass of the oven dried sample (before pycnometer) (A)	492.7 grams
Mass of the saturated surface dry aggregate (for absorption) (S)	500.0 grams
Mass of the oven dry aggregate (for absorption) (A)	492.7 grams
Test Sample Preparation	6% Moisture
Bulk specific gravity	2.663
Bulk specific gravity (SSD Basis)	2.703
Apparent specific gravity	2.773
Absorption	1.5 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 6/1/2022 ✔