DIME - Test Summary

Summary for Test 2022-04-26-5-4

Test performed: CTM 214-August 2010

Project Identifiers	Project ID: 99999 DEA: 0322222
DIST-CO-RTE-PM	03-SAC,OMG-888,99,80-0.6-0.6
Award Date	Not set
Closeout Date	Not set
Work Description	THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES.
Location Description	THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES.
QA Service Level	(Verified on 04/05/2013)

Sample Taken Date	04/26/2022	Sample Unique Key	5
Date that the sample was received by the laboratory/organization performing the testing	04/26/2022	Sample type	Aggregate Prequalification Program
A brief description of the sample	1" x No. 4	The quantity of what the sample constitutes	Stockpile
From where was the sample collected	Source	First name of sampler or witnessed by	John
Last name of sampler or witnessed by	O'Mara	Title of sampler	Sampler
Telephone number of sampler		Laboratory sample identification
Linked DIME Sample ID		The fabricator/manufacturer/facility name	jomara fabricator
Transportation Laboratory (TL) Number		Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier		Structure name
Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	XX-XX-XXXX
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Stockpile @ Yard
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	1 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number

DIME Sample ID: 2022-04-26-5

DIME Test ID: 2022-04-26-5-4

Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory

Test Method: CTM 214-August 2010: Method of Test for Soundness of Aggregates by Use of Sodium Sulfate

Test Release Date: 2022-04-26

What size aggregate is being tested?: Coarse Aggregate

Input Type: Calculated

Tester's full name: John OMara

Date of test: 04/27/2022

Percentage Loss of material retained on 2 x 1 ½ in. sieve: no data

Percentage Loss of material retained on 1 ½ x 1 in. sieve: 0.0 %

Percentage Loss of material retained on 1 x ¾ in. sieve: 0.0 %

Percentage Loss of material retained on ¾ x ½ in. sieve: 0.2 %

Percentage Loss of material retained on ½ x ⅜ in. sieve: 0.1 %

Percentage Loss of material retained on ⅜ in. x #4 sieve: 0.1 %

Percentage Loss of material retained on 2 in. through 1 1/2 in. sieve: no data

Percentage Loss of material retained on 1 in. through 3/4 in. sieve: no data

Percentage Loss of material retained on 3/4 in. through #4 sieve: no data

Weighted Average Percent Loss of Coarse Aggregate: 0.1 %

Batch Soundness Loss of Coarse Aggregate (2 1/2 in maximum): no data

Batch Soundness Loss of Coarse Aggregate (1 1/2 in maximum): no data

General comments (publicly viewable) (Max 1000 characters): Test Example

Test was verified on 4/26/2022 ✔