Summary for Test 2022-04-01-15-3
Test performed: CTM 202-November 2011Project Information
| Project Identifiers | Project ID: 214336 DEA: 07302404 EFIS: 0713000488 |
|---|---|
| DIST-CO-RTE-PM | 07-VEN-101-37/40 |
| Award Date | 11/17/2020 |
| Closeout Date | 09/24/2024 |
| Work Description | PADRE JUAN REHAB |
| Location Description | VEN 101 |
| QA Service Level | 1 (Verified on 02/26/2021) |
Sample Information
| Sample Taken Date | 04/01/2022 | Sample Unique Key | 15 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 04/04/2022 | Sample type | Department Acceptance |
| A brief description of the sample | 1x4 and WCS | The quantity of what the sample constitutes | 100 cy |
| From where was the sample collected | Job Site | First name of sampler or witnessed by | Victor |
| Last name of sampler or witnessed by | Pham | Title of sampler | |
| Telephone number of sampler | 2137924794 | Laboratory sample identification | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Short Load- Rte 101 | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-33-0035 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | PCC mix | The fabricator/manufacturer designation for the sample | mix CTS-65-EHI |
| The plant number | short load ventura | A detailed description of where the material sample was collected | Stockpile @ Yard |
| Where the material sample would have been placed if not sampled | slab replacement | Primary Aggregate Nominal Size | 1 inch |
| The concrete mix design number | CTS-65-EHI | Lot number | |
| Sublot number | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2022-04-01-15
DIME Test ID: 2022-04-01-15-3
Testing Lab: CT D07 - Plant Services, Unit 1841
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2022-04-07
Test Results
What size aggregate is being tested?: Fine Aggregate
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Measured
Tester's full name: Victor Pham
Date of test: 04/04/2022
| Sieve Size | Cumulative Mass Retained | Cumulative Percent Passing | ||||
|---|---|---|---|---|---|---|
| 515 grams | ||||||
| 0.0 grams | 100 % | |||||
| 20.2 grams | 96 % | |||||
| 88.7 grams | 83 % | |||||
| 164.9 grams | 68 % | |||||
| 272.6 grams | 47 % | |||||
| 422.0 grams | 18 % | |||||
| 494.0 grams | 4 % | |||||
| 507.7 grams | 1 % | |||||
| 515.0 grams | ||||||
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 4/7/2022 ✔
