Summary for Test 2022-03-06-10-1
Test performed: CTM 524-March 2013Project Information
| Project Identifiers | Project ID: 214573 DEA: 073096U4 EFIS: 0719000091 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-210-R0.0/R9.7 |
| Award Date | 04/03/2020 |
| Closeout Date | 06/06/2024 |
| Work Description | PLACE CONCRETE PAVEMENT, BARRIER, HMA, DRAINAGE, AND ELECTRICAL. |
| Location Description | LOS ANGELES COUNTY IN LOS ANGELES FROM INTERSTATE 5 TO WHEATLAND AVENUE UNDERCROSSING |
| QA Service Level | 1 (Verified on 06/05/2020) |
Sample Information
| Sample Taken Date | 03/06/2022 | Sample Unique Key | 10 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 03/06/2022 | Sample type | Department Acceptance |
| A brief description of the sample | JPCP-RSC Beams | The quantity of what the sample constitutes | 130 CY |
| From where was the sample collected | Supplier | First name of sampler or witnessed by | Arnold |
| Last name of sampler or witnessed by | Truong | Title of sampler | MREA |
| Telephone number of sampler | 213-808-4582 | Laboratory sample identification | 22-0411 |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Flatiron Plant | |
| Transportation Laboratory (TL) Number | 22-0411 | Inspector Lot Number from the Transportation Laboratory (TL) Form | 030622AT |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Concrete | The concrete mix design number | 3215-JPCPRSC-12 |
|---|---|---|---|
| The truck number from where the sample was collected | 17 | The batch plant ticket number from where the sample was collected | 17 |
| Concrete batch plant | Flatiron Batch Plant | The fabricator/manufacturer designation for the sample | 3215-JPCPRSC-12 |
| A detailed description of where the material sample was collected | Skiploader | Where the material sample would have been placed if not sampled | WB118 to EB210 connector |
| From Lot No. | Bag Lot No. |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2022-03-06-10
DIME Test ID: 2022-03-06-10-1
Testing Lab: CT D07 - Materials Field Laboratory, Unit 1953
Test Method: CTM 524-March 2013: Method of Test for Flexural Strength Of Rapid Strength Concrete
Test Release Date: 2022-03-18
Test Results
Number of specimens: 3
Does the testing machine measure load or stress on the beam specimen?: Load
Fracture initiates in the tension surface: Within the Middle Third of the Span Length
Fracture occurred at a capped section: Yes
Is a beam dimensional correction factor used?: No
Input Type: Measured
Tester's full name: Arnold Truong
Date of test: 03/16/2022
Identification number: 22-0411
Width of specimen: 6 inch
Width of specimen 2: 5.9375 inch
Width of specimen 3: 6.0625 inch
Depth of specimen: 6 inch
Depth of specimen 2: 5.9375 inch
Depth of specimen 3: 6 inch
Span length of specimen: 18 inch
Span length of specimen 2: 18 inch
Span length of specimen 3: 18 inch
Maximum load applied: 8467 lb
Maximum load applied 2: 8689 lb
Maximum load applied 3: 8421 lb
Cap thickness: 0 inch
Curing history and apparent moisture condition of the specimen: Sand pit
If specimen was capped, ground or if leather shims were used: No
Defects in specimen, including numbers of beams discarded during test: 0
Age of specimen: 10 days
Age of specimen in hours: no data
Modulus of rupture: 740 psi
Modulus of rupture 2: 780 psi
Modulus of rupture 3: 730 psi
Modulus of rupture average: 750 psi
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 3/18/2022 ✔