Summary for Test 2021-06-23-54-7
Test performed: CTM 389-19Project Information
| Project Identifiers | Project ID: 215367 DEA: 021J4904 EFIS: 0220000084 |
|---|---|
| DIST-CO-RTE-PM | 02-TEH-32-14.0/20.0 |
| Award Date | 02/02/2021 |
| Closeout Date | 04/11/2024 |
| Work Description | PLACE HOT MIX ASPHALT (TYPE A). |
| Location Description | TEHAMA COUNTY ABOUT 28 MILES EAST OF FOREST RANCH FROM 1.1 MILES EAST OF DEER CREEK BRIDGE NO. 08-0068 TO 0.4 MILE WEST OF SLATE CREEK BRIDGE NO. 08-0154 |
| QA Service Level | 1 (Verified on 12/24/2020) |
Sample Information
| Sample Taken Date | 06/23/2021 | Sample Unique Key | 54 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/24/2021 |
| Sample type | Verification | A brief description of the sample | Lime Treated 3/8-inch Type A HMA (eq. PG 64-28 M) with 15.0 RAP and virgin PG 64-28 M from Valero - Benicia |
| The quantity of what the sample constitutes | JMF Verification | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Derek | Last name of sampler or witnessed by | Serna |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | D78854 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Sierra Cascade Aggregate and Asphalt Products | Transportation Laboratory (TL) Number | 896904 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/8 inch | Lot number | |
| Sublot number | HMA Mix Number | Not set | |
| Binder content (%) | Not set | Virgin binder PG | Not set |
| Design binder PG | Not set | Binder Supplier | Not set |
| RAP content (%) | Not set | WMA Additives | Not set |
| Antistrip type | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2021-06-23-54
DIME Test ID: 2021-06-23-54-7
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt
Test Release Date: 2022-02-15
Test Results
Specified number of passes at 12.7 mm: 15000
Specimen Preparation Method:
Input Type: Measured
Tester's full name: Darrell Valasek
Date of test: 07/01/2021
Test Temperature: 122 F
Compaction Method: SGC Cylindrical Specimen
Air Void Content for specimen A-1: no data
Air Void Content for specimen A-2: no data
Air Void Content for specimen B-1: no data
Air Void Content for specimen B-2: no data
Stripping Inflection Point (Wheel A): >15000
Stripping Inflection Point (Wheel B): >15000
Maximum impression at 5000 passes (left wheel): 1.18 mm
Maximum impression at 5000 passes (right wheel): 1.44 mm
Average impression at 5000 passes (left/right avg): 1.31 mm
Maximum impression at 10000 passes (left wheel): 1.35 mm
Maximum impression at 10000 passes (right wheel): 1.72 mm
Average impression at 10000 passes (left/right avg): 1.54 mm
Maximum impression at 15000 passes (left wheel): 1.41 mm
Maximum impression at 15000 passes (right wheel): 1.82 mm
Average impression at 15000 passes (left/right avg): 1.62 mm
Maximum impression at 20000 passes (left wheel): no data mm
Maximum impression at 20000 passes (right wheel): no data mm
Average impression at 20000 passes (left/right avg): no data mm
Maximum impression at 25000 passes (left wheel): no data mm
Maximum impression at 25000 passes (right wheel): no data mm
Average impression at 25000 passes (left/right avg): no data mm
Raw Data: no data
General comments (publicly viewable) (Max 1000 characters): CT 360, Surface Abrasion Loss = 0.2 g/cm²
Test was verified on 2/15/2022 ✔