Summary for Test 2021-06-23-52-1
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 215367 DEA: 021J4904 EFIS: 0220000084 |
---|---|
DIST-CO-RTE-PM | 02-TEH-32-14.0/20.0 |
Award Date | 02/02/2021 |
Closeout Date | 04/11/2024 |
Work Description | PLACE HOT MIX ASPHALT (TYPE A). |
Location Description | TEHAMA COUNTY ABOUT 28 MILES EAST OF FOREST RANCH FROM 1.1 MILES EAST OF DEER CREEK BRIDGE NO. 08-0068 TO 0.4 MILE WEST OF SLATE CREEK BRIDGE NO. 08-0154 |
QA Service Level | 1 (Verified on 12/24/2020) |
Sample Information
Sample Taken Date | 06/23/2021 | Sample Unique Key | 52 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/24/2021 |
Sample type | Verification | A brief description of the sample | Combined Treated Virgin Aggregate for use in 3/8-inch Type A HMA |
The quantity of what the sample constitutes | JMF Verification | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Derek | Last name of sampler or witnessed by | Serna |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | D78855A | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Sierra Cascade Aggregate and Asphalt Products | Transportation Laboratory (TL) Number | 896906 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-32-0002::Chester Pit 1 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Cold Feed | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/8 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2021-06-23-52
DIME Test ID: 2021-06-23-52-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2022-02-04
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Has the fine aggregate sample been reduced?: No
Input Type: Measured
Tester's full name: Dennis Hickey and T. McCormick
Date of test: 06/28/2021
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
1,650.5 grams | ||||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
70.0 grams | 95.8 % | |||||
488 grams | 70.4 % | |||||
757.0 grams | 54.1 % | |||||
205.6 grams | 31.8 % | |||||
305.6 grams | 20.9 % | |||||
360.2 grams | 15 % | |||||
396.7 grams | 11 % | |||||
426.8 grams | 7.7 % | |||||
447.0 grams | 5.54 % | |||||
0.0 grams |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 2/4/2022 ✔