Summary for Test 2022-01-22-9-1
Test performed: CTM 521-June 2020Project Information
| Project Identifiers | Project ID: 214671 DEA: 07303904 EFIS: 0714000044 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-10-31.2/37.2 |
| Award Date | 11/25/2020 |
| Closeout Date | 10/11/2023 |
| Work Description | LANE REPLACEMENT |
| Location Description | LOS ANGELES COUNTY IN BALDWIN PARK AND WEST COVINA FROM 0.1 MILE EAST OF THE 10/605 SEPARATION TO 0.3 MILE WEST OF CITRUS STREET OVERCROSSING |
| QA Service Level | 1 (Verified on 01/21/2021) |
Sample Information
| Sample Taken Date | 01/22/2022 | Sample Unique Key | 9 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 01/22/2022 |
| Sample type | Per Request | A brief description of the sample | A set of 2 LCB RS cylinders |
| The quantity of what the sample constitutes | Per 500 CY | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Edmond | Last name of sampler or witnessed by | Jabbour |
| Title of sampler | Field Materials Tester | Telephone number of sampler | 9092398226 |
| Laboratory sample identification | 220087 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Security Paving Burbank Batch Plant | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Concrete | The concrete mix design number | G322LRS271 |
|---|---|---|---|
| The truck number from where the sample was collected | load 3 | The batch plant ticket number from where the sample was collected | 224739 |
| Concrete batch plant | Security Paving Burbank Batch Plant | The fabricator/manufacturer designation for the sample | |
| A detailed description of where the material sample was collected | In-place | Where the material sample would have been placed if not sampled | |
| From Lot No. | Bag Lot No. |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2022-01-22-9
DIME Test ID: 2022-01-22-9-1
Testing Lab: Kleinfelder, Incorporated - Los Angeles
Test Method: CTM 521-June 2020: Method of Test for Compressive Strength of Molded Concrete Cylinders
Test Release Date: 2022-01-24
Test Results
Unit system used?: US Units
Number of specimens: 2
Test performed: With no density determined
Input Type: Calculated
Tester's full name: Edmond Jabbour
Date of test: 01/22/2022
Capped in accordance with?: ASTM C617 - Sulfur Mortar Cap
Average diameter of cylinder 1: 6.00 in
Average diameter of cylinder 2: 6.00 in
Maximum load on cylinder 1: 0 lb
Maximum load on cylinder 2: 0 lb
Type of fracture pattern of cylinder 1: 1
Type of fracture pattern of cylinder 2: 1
Comment on any defect in either specimen or caps (Max 250 Characters): No known diameter, load, or fracture pattern. QC tested onsite.
Correction factor for cylinder 1: 1
Correction factor for cylinder 2: 1
Age of specimen: 0 days
Age of specimen in hours: 3 hours
Cross sectional area of cylinder 1: 0 in^2
Cross sectional area of cylinder 2: 0 in^2
Compressive strength (to nearest 10 psi): 390 psi
General comments (publicly viewable) (Max 1000 characters): 390 psi average at 3 hours for opening age LCBRS breaks performed by QC.
Test was verified on 1/24/2022 ✔