Summary for Test 2021-06-21-18-2
Test performed: AASHTO T30-19Project Information
| Project Identifiers | Project ID: 215251 DEA: 021J4604 EFIS: 0220000081 |
|---|---|
| DIST-CO-RTE-PM | 02-SIS-96-34.5/38.8,88.0/92.0 |
| Award Date | 02/02/2021 |
| Closeout Date | 09/27/2021 |
| Work Description | HMA OVERLAY, REPLACE AC SURFACING, SHOULDER BACKING & TRAFFIC STRIPE. |
| Location Description | SISKIYOU COUNTY NEAR HAPPY CAMP FROM 0.1 MILE EAST OF OAK FLAT CREEK BRIDGE TO 0.1 MILE EAST OF BENJAMIN CREEK ROAD AND FROM 0.3 MILE WEST OF BEAVER CREEK BRIDGE TO 1.0 MILE WEST OF LUMGREY CREEK BRIDGE |
| QA Service Level | 1 (Verified on 10/30/2020) |
Sample Information
| Sample Taken Date | 06/21/2021 | Sample Unique Key | 18 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 06/21/2021 | Sample type | Department Acceptance |
| A brief description of the sample | 1 bag of Fine RAP (No. 4) for use in 3/8-inch Type HMA | The quantity of what the sample constitutes | Production Start-Up Evaluation |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | Devin |
| Last name of sampler or witnessed by | Owens | Title of sampler | PEI |
| Telephone number of sampler | Laboratory sample identification | D78848B | |
| Linked DIME Sample ID | 2021-06-21-17 | The fabricator/manufacturer/facility name | Tullis - Northstate Asphalt - Redding, CA |
| Transportation Laboratory (TL) Number | 853076 | Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown |
| Structure unique identifier | Structure name | Not Applicable | |
| Bid Item | Not set |
Material Information
| Material Type | Reclaimed Asphalt Pavement | RAP Source | Northstate Asphalt |
|---|---|---|---|
| Aggregate Size | Fine | Aggregate Source | Unknown |
| RAP Stockpile | Stockpile Size (tons) | Unknown | |
| Reclaimed Asphalt Pavement Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2021-06-21-18
DIME Test ID: 2021-06-21-18-2
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)
Test Release Date: 2022-01-21
Test Results
Does this test use 1/4 sieve?: Yes
Is an aggregate correction factor used?: No
Input Type: Measured
Tester's full name: Terry McCormick
Date of test: 06/23/2021
| Cumulative Mass Retained | Cumulative Percent Passing | |||||
|---|---|---|---|---|---|---|
| 1207.8 grams | ||||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 1.0 grams | 99.9 % | |||||
| 129.4 grams | 89.3 % | |||||
| 268.0 grams | 77.8 % | |||||
| 537.2 grams | 55.5 % | |||||
| 727.4 grams | 39.8 % | |||||
| 858.5 grams | 28.9 % | |||||
| 956.3 grams | 20.8 % | |||||
| 1025.2 grams | 15.1 % | |||||
| 1068.9 grams | 11.5 % | |||||
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 1/21/2022 ✔