Summary for Test 2022-01-13-11-10
Test performed: AASHTO T30-19Project Information
| Project Identifiers | Project ID: 213811 DEA: 112T2184 EFIS: 1116000174 |
|---|---|
| DIST-CO-RTE-PM | 11-SD-5-R38.4/R47.3 |
| Award Date | 10/29/2018 |
| Closeout Date | 01/03/2024 |
| Work Description | (Alternative Delivery) Construct HOV lanes, soundwalls, culvert rehab, ITS, and bike trail on I-5 . NCC I-5 Highway Improvement. |
| Location Description | IN SAN DIEGO COUNTY IN ENCINITAS AND CARLSBAD FROM SAN ELIJO LAGOON BRIDGE TO 0.3 MILE NORTH OF PALOMAR AIRPORT ROAD OVERCROSSING. |
| QA Service Level | 1 (Verified on 12/19/2018) |
Sample Information
| Sample Taken Date | 01/13/2022 | Sample Unique Key | 11 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 01/14/2022 |
| Sample type | Quality Assurance | A brief description of the sample | 1/2" HMA PSU |
| The quantity of what the sample constitutes | 12 Boxes, 3 bags, 2 cans | From where was the sample collected | Source |
| First name of sampler or witnessed by | MARCO | Last name of sampler or witnessed by | ESTUDILLO |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Vulcan Otay | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-37-0035::CHULA VISTA |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | At Plant | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/2 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2022-01-13-11
DIME Test ID: 2022-01-13-11-10
Testing Lab: CT D11 - District 11 Materials Laboratory
Test Method: AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)
Test Release Date: 2022-02-01
Test Results
Does this test use 1/4 sieve?: No
Is an aggregate correction factor used?: No
Input Type: Measured
Tester's full name: Daniel Smith
Date of test: 01/19/2022
| Cumulative Mass Retained | Cumulative Percent Passing | |||||
|---|---|---|---|---|---|---|
| 1394.0 grams | ||||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 4.0 grams | 99.7 % | |||||
| 45.0 grams | 96.8 % | |||||
| 325.0 grams | 76.7 % | |||||
| 553.3 grams | 60.3 % | |||||
| 741.0 grams | 46.8 % | |||||
| 920.0 grams | 34 % | |||||
| 1067.3 grams | 23.4 % | |||||
| 1183.9 grams | 15.1 % | |||||
| 1260.3 grams | 9.6 % | |||||
General comments (publicly viewable) (Max 1000 characters): PASSED
Test was verified on 2/1/2022 ✔