Summary for Test 2021-12-21-4-2
Test performed: CTM 523-May 2020Project Information
| Project Identifiers | Project ID: 214524 DEA: 07304504 EFIS: 0714000067 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-57-R0.0/R4.5 |
| Award Date | 06/11/2020 |
| Closeout Date | 04/03/2025 |
| Work Description | CONCRETE PAVEMENT, CONCRETE BARRIER, AND ELECTRICAL WORK. |
| Location Description | LOS ANGELES COUNTY IN DIAMOND BAR AND CITY OF INDUSTRY FROM ORANGE COUNTY LINE TO ROUTE 57/60 SEPARATION |
| QA Service Level | 1 (Verified on 08/12/2020) |
Sample Information
| Sample Taken Date | 12/21/2021 | Sample Unique Key | 4 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 12/22/2021 | Sample type | Department Acceptance |
| A brief description of the sample | Concrete | The quantity of what the sample constitutes | 310 cu. yd. |
| From where was the sample collected | Job Site | First name of sampler or witnessed by | Philip |
| Last name of sampler or witnessed by | Maquiran | Title of sampler | MREA |
| Telephone number of sampler | 2133581518 | Laboratory sample identification | 21-3011 |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Vanguard at the 57 Freeway | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Concrete | The concrete mix design number | 57030SL |
|---|---|---|---|
| The truck number from where the sample was collected | TM Load 1 | The batch plant ticket number from where the sample was collected | 1 |
| Concrete batch plant | Vanguard BP at 57 FWY | The fabricator/manufacturer designation for the sample | |
| A detailed description of where the material sample was collected | BP Vanguard at loader bucket | Where the material sample would have been placed if not sampled | |
| From Lot No. | Bag Lot No. |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2021-12-21-4
DIME Test ID: 2021-12-21-4-2
Testing Lab: CT D07 - Materials Field Laboratory, Unit 1953
Test Method: CTM 523-May 2020: Method of Test for Flexural Strength of Concrete
Test Release Date: 2022-01-19
Test Results
Number of specimens: 2
Unit system used?: US Units
Does the testing machine measure load or stress on the beam specimen?: Load
Fracture initiates in the tension surface: Within the Middle Third of the Span Length
Is a beam dimensional correction factor used?: No
Input Type: Calculated
Tester's full name: Phillip Maquiran
Date of test: 01/18/2022
Identification number: 22-0008
Width of specimen: 6.1 inch
Width of specimen 2: 6.1 inch
Depth of specimen: 6.0 inch
Depth of specimen 2: 6.1 inch
Span length of specimen: 18 inch
Span length of specimen 2: 18 inch
Maximum load applied: 8969 lb
Maximum load applied 2: 9370 lb
Curing history and apparent moisture condition of the specimen: o
If specimen was capped, ground or if leather shims were used: o
Defects in specimen: o
Age of specimen: 28 days
Age of specimen in hours: no data
Modulus of rupture: 780 psi
Modulus of rupture 2: 790 psi
Modulus of rupture average: 790 psi
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 1/19/2022 ✔