Summary for Test 2021-11-16-40-2

Test performed: CTM 389-19

Project Information

Project IdentifiersProject ID: 215368
DEA: 051M0404
DIST-CO-RTE-PM05-SBT-25-46.7/R49.8
Award Date02/05/2021
Closeout Date09/02/2022
Work DescriptionCOLD PLANE, PLACE RHMA AND SLURRY SEAL SHOULDERS.
Location DescriptionSANBENITO COUNTY IN AND NEAR HOLLISTER FROM 0.1 MILE NORTH OF BEST ROAD TO PLAZA DRIVE
QA Service Level1 (Verified on 01/12/2021)

Sample Information

Sample Taken Date11/16/2021 Sample Unique Key40
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing12/13/2021
Sample typeDispute Resolution A brief description of the sample1/2 RHMA-G
The quantity of what the sample constitutes8 Boxes From where was the sample collectedSource
First name of sampler or witnessed byDavid Last name of sampler or witnessed byGleffe
Title of samplerMREA Telephone number of sampler805-688-5920
Laboratory sample identification021-065 Linked DIME Sample ID
The fabricator/manufacturer/facility nameGraniterock Aromas Batch plant Transportation Laboratory (TL) NumberC1209211
Inspector Lot Number from the Transportation Laboratory (TL) Form1 Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeHot Mix Asphalt HMA TypeRHMA-G
HMA Grading1/2 inch Lot number1
Sublot number1 HMA Mix NumberNot set
Binder content (%)Not set Virgin binder PGNot set
Design binder PGNot set Binder SupplierNot set
RAP content (%)Not set WMA AdditivesNot set
Antistrip typeNot set

Test Details

DIME Sample ID: 2021-11-16-40
DIME Test ID: 2021-11-16-40-2
Testing Lab: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Test Method: CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt
Test Release Date: 2021-12-21

Test Results


Specified number of passes at 12.7 mm: 15000
Specimen Preparation Method:
Input Type: Measured
Tester's full name: Glenn Bradley
Date of test: 12/21/2021
Test Temperature: 122 F
Compaction Method: SGC Cylindrical Specimen
Air Void Content for specimen A-1: no data
Air Void Content for specimen A-2: no data
Air Void Content for specimen B-1: no data
Air Void Content for specimen B-2: no data
Stripping Inflection Point (Wheel A): >15000
Stripping Inflection Point (Wheel B): >15000
Maximum impression at 5000 passes (left wheel): 4.38 mm
Maximum impression at 5000 passes (right wheel): 3.64 mm
Average impression at 5000 passes (left/right avg): 4.01 mm
Maximum impression at 10000 passes (left wheel): 5.38 mm
Maximum impression at 10000 passes (right wheel): 4.52 mm
Average impression at 10000 passes (left/right avg): 4.95 mm
Maximum impression at 15000 passes (left wheel): 5.83 mm
Maximum impression at 15000 passes (right wheel): 5.15 mm
Average impression at 15000 passes (left/right avg): 5.49 mm
Maximum impression at 20000 passes (left wheel): no data
Maximum impression at 20000 passes (right wheel): no data
Average impression at 20000 passes (left/right avg): no data
Maximum impression at 25000 passes (left wheel): no data
Maximum impression at 25000 passes (right wheel): no data
Average impression at 25000 passes (left/right avg): no data
Raw Data: no data
General comments (publicly viewable) (Max 1000 characters): Title of this DIME test method is incorrect. S/B Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt

Test was verified on 12/21/2021