Summary for Test 2021-11-22-5-3
Test performed: ASTM F606-21Project Information
| Project Identifiers | Project ID: 213568 DEA: 034H6904 EFIS: 0319000026 |
|---|---|
| DIST-CO-RTE-PM | 03-SAC,SAC/SOL-12-0-0.4/26.3-26.4, 0.0-0.4/26.3-26.4 |
| Award Date | 08/13/2018 |
| Closeout Date | 08/28/2023 |
| Work Description | Major Damage Restoration (Emergency Opening) |
| Location Description | Not set |
| QA Service Level | 1 (Verified on 08/24/2018) |
Sample Information
| Sample Taken Date | 11/22/2021 | Sample Unique Key | 5 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 12/03/2021 |
| Sample type | Quality Assurance | A brief description of the sample | F1554 Grade 55 HDG Anchor Bolts |
| The quantity of what the sample constitutes | 44ea 5/8" x 14"; 24ea 3/4" x 14"; 80 ea 1" x 18"; 92 ea 1" x 17" | From where was the sample collected | Fabricator |
| First name of sampler or witnessed by | Greg | Last name of sampler or witnessed by | Thompson |
| Title of sampler | Associate Steel Inspector | Telephone number of sampler | 510-376-7155 |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | XKT Engineering | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | B9-131-21 | Structure unique identifier | |
| Structure name |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | |
|---|---|---|---|
| Heat Number(s) | 3800015418 3800021442 3800022774 | Nut Mfg. Lot Number(s) | 458875B 450605C 455386A |
| Washer Mfg. Lot Number(s) | 12875 14849 D9793 | Bolt Specification | F1554 HDG |
| Bolt Length(s) | 5/8x14,3/4x14,1x17and 1x18 | Nut Specification | F563 DH |
| Washer Specification | F436 type 1 | Finish | HDG |
| Diameter/Size | 58", 3/4", 1" | Bolt Mfg. Lot Number | 5/8- 380001541820 3/4- 380002144220 1- 3800 |
| Rocap Test Requirement(s) | no | Lubricant Requirements(s) | yes |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2021-11-22-5
DIME Test ID: 2021-11-22-5-3
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)
Test Release Date: 2021-12-20
Test Results
Number of Samples: 1
Input Type: Measured
Tester's full name: spaine
Date of test: 12/17/2021
UTM: 400kip
Temperature: 72
| Num | Sample | Size | Area (in^2) | Peak Load (lbf) | Peak Load (kN) | Tensile Strength (psi) | Stress at Offset (psi) | Load at Offset (lbf) | Comments |
|---|---|---|---|---|---|---|---|---|---|
| 1 | 2A | UNC 3/4 | 0.334 | 31532 | 140 | 94368 | 76781 | 25645 | F1554 Full Length Tensile |
General comments (publicly viewable) (Max 1000 characters): F1554 Full Length Tensile
Test Graph
Source: Bluehill Data Point FileTest was verified on 12/20/2021 ✔