Summary for Test 2021-11-12-40-3
Test performed: AASHTO T315-20Project Information
| Project Identifiers | Project ID: 215601 DEA: 024H3404 EFIS: 0218000109 |
|---|---|
| DIST-CO-RTE-PM | 02-TRI-299-5.2/5.7 |
| Award Date | 05/14/2021 |
| Closeout Date | 05/02/2022 |
| Work Description | INSTALL LEFT TURN LANE. |
| Location Description | TRINITY COUNTY NEAR SALYER FROM 0.3 MILE WEST OF DENNY ROAD TO 0.2 MILE WEST OF PONY BAR CREEK BRIDGE |
| QA Service Level | 1 (Verified on 03/29/2021) |
Sample Information
| Sample Taken Date | 11/12/2021 | Sample Unique Key | 40 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 12/02/2021 | Sample type | Department Acceptance |
| A brief description of the sample | BINDER | The quantity of what the sample constitutes | 1 CAN |
| From where was the sample collected | Source | First name of sampler or witnessed by | J |
| Last name of sampler or witnessed by | DELGADO | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Valero - Benicia, CA | |
| Transportation Laboratory (TL) Number | 695661 | Inspector Lot Number from the Transportation Laboratory (TL) Form | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Asphalt Binder | Performance Grade | PG 64-28 M |
|---|---|---|---|
| Modified | Yes | Lot number | |
| Sublot number | Tank number | ||
| Time of sample | HMA Supplier | Mercer Fraser - Willowcreek | |
| Certified Asphalt Supplier | Valero Marketing & Supply - Benicia CA | Multigrade | No |
| Multigrade Type | Asphalt Binder Mix Number | Not set | |
| HMA Type | Not set | HMA Supplier Mix ID Number | Not set |
Test Details
DIME Sample ID: 2021-11-12-40
DIME Test ID: 2021-11-12-40-3
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2021-12-13
Test Results
Phase: PAV residue
Input Type: Measured
Tester's full name: Juan Gomez
Date of test: 12/10/2021
Test Plate Diameter: 8 mm
Test Gap: 2 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 1.00 %
Stress Amplitude: 15.459 kPa
Phase Angle (δ) (for the 10 cycles): 43.4 degree
Complex Modulus (G*) (for the 10 measurements): 1545.899 kPa
Test Temperature (Specimen 1): 22.0 C
(G*) x sin(δ)=: 1062 kPa
General comments (publicly viewable) (Max 1000 characters): Per 2018 Standard Specifications PAV
Test was verified on 12/13/2021 ✔
