Summary for Test 2021-10-27-34-2
Test performed: AASHTO T315-20Project Information
| Project Identifiers | Project ID: 215704 DEA: 020J9104 EFIS: 0219000174 |
|---|---|
| DIST-CO-RTE-PM | 02-LAS,MOD,SHA-89,139,299-VAR |
| Award Date | 06/03/2021 |
| Closeout Date | 08/08/2022 |
| Work Description | REPAIR UNSOUND CONCRETE, POLYESTER CONCRETE OVERLAYS, JOINT SEALS. |
| Location Description | LASSEN, MODOC, AND SHASTA COUNTIES AT VARIOUS LOCATIONS |
| QA Service Level | 1 (Verified on 05/03/2021) |
Sample Information
| Sample Taken Date | 10/27/2021 | Sample Unique Key | 34 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 12/02/2021 | Sample type | Department Acceptance |
| A brief description of the sample | 3/4 HMA A 25rap PG58-34m Valero Benicia | The quantity of what the sample constitutes | 1 Can |
| From where was the sample collected | Source | First name of sampler or witnessed by | C |
| Last name of sampler or witnessed by | Bngant | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Valero-Benicia Asphalt Plant | |
| Transportation Laboratory (TL) Number | 875743 | Inspector Lot Number from the Transportation Laboratory (TL) Form | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Asphalt Binder | Performance Grade | PG 58-34 M |
|---|---|---|---|
| Modified | Yes | Lot number | |
| Sublot number | Tank number | ||
| Time of sample | HMA Supplier | ||
| Certified Asphalt Supplier | Valero Marketing & Supply - Benicia CA | Multigrade | No |
| Multigrade Type | Asphalt Binder Mix Number | Not set | |
| HMA Type | Not set | HMA Supplier Mix ID Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2021-10-27-34
DIME Test ID: 2021-10-27-34-2
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2021-12-10
Test Results
Phase: RTFO residue two specimens
Input Type: Measured
Tester's full name: Eva Torres
Date of test: 12/07/2021
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.00 %
Stress Amplitude: 0.765 kPa
Phase Angle (δ) (for the 10 cycles): 57.3 degree
Complex Modulus (G*) (for the 10 measurements): 7.652 kPa
Test Temperature (Specimen 1): 58.0 C
Dynamic Shear, G*/sin(δ): 9.09 kPa
Stress Amplitude 2: 0.443 kPa
Phase Angle 2 (δ) (for the 10 cycles): 58.6 degree
Complex Modulus 2 (G*) (for the 10 measurements) : 4.426 kPa
Test Temperature (Specimen 2): 64.0 C
Dynamic Shear 2, G*/sin(δ): 5.19 kPa
Delta at 2.2 kpa: 59.6 degree
General comments (publicly viewable) (Max 1000 characters): Per 2018 Standard Specifications RTFO
Test was verified on 12/10/2021 ✔