DIME - Test Summary

Summary for Test 2021-11-12-36-2

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 214397 DEA: 120N3204 EFIS: 1213000196
DIST-CO-RTE-PM	12-ORA-91-R9.8/R18.9
Award Date	11/07/2019
Closeout Date	07/01/2022
Work Description	CONST PRECAST SLAB REPLACEMENT, COLD PLANE AC PVMT AND PLACE RHMA.
Location Description	ORANGE COUNTY IN ANAHEIM AND YORBA LINDA FROM 0.3 MILE WEST OF LAKEVIEW AVENUE OVERCROSSING TO RIVERSIDE COUNTY LINE
QA Service Level	1 (Verified on 12/02/2019)

Sample Taken Date	11/12/2021	Sample Unique Key	36
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	11/30/2021
Sample type	Verification	A brief description of the sample	PSUE 1/2" RWMA-G-SP, 0.25% Evotherm
The quantity of what the sample constitutes	2 Bags of Combined Aggregate	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Cuong	Last name of sampler or witnessed by	Pham
Title of sampler		Telephone number of sampler
Laboratory sample identification	0654G-21	Linked DIME Sample ID
The fabricator/manufacturer/facility name	RJ Noble Orange	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-33-0035, 91-33-0039
The fabricator's/manufacturer's product name for the sample	1/2 RWMA-G-SP	The fabricator/manufacturer designation for the sample
The plant number	50R003ARSPWEO	A detailed description of where the material sample was collected	Belt Cut at RJ Noble Orange Plant
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

DIME Sample ID: 2021-11-12-36

DIME Test ID: 2021-11-12-36-2

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2021-12-03

Input Type: Measured

Tester's full name: Sebastian Ferrer

Date of test: 12/01/2021

Mass of saturated surface dry sample (before pycnometer) (S): 500.0 grams

Mass of the pycnometer with water and aggregate (C): 976.5 grams

Mass of the pycnometer with water (B): 663.7 grams

Mass of the oven dried sample (before pycnometer) (A): 493.5 grams

Mass of the saturated surface dry aggregate (for absorption) (S): 500.0 grams

Mass of the oven dry aggregate (for absorption) (A): 493.5 grams

Test Sample Preparation: 6% Moisture

Bulk specific gravity: 2.636

Bulk specific gravity (SSD Basis): 2.671

Apparent specific gravity: 2.731

Absorption: 1.3 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 12/3/2021 ✔