Summary for Test 2021-11-03-40-1

Test performed: AASHTO T315-20

Project Information

Project IdentifiersProject ID: 214426
DEA: 030A5704
EFIS: 0300020593
DIST-CO-RTE-PM03-YUB-20-13.3/R18.2
Award Date01/02/2020
Closeout Date07/15/2025
Work DescriptionBrowns Valley Rehab: CONSTRUCT BRIDGE, REALIGN CURVE, WIDEN SHOULDERS AND CULVERT WORK.
Location DescriptionYUBA COUNTY FROM MARYSVILLE ROAD TO THE YUBA RIVER BRIDGE
QA Service Level1 (Verified on 10/23/2019)

Sample Information

Sample Taken Date11/03/2021 Sample Unique Key40
Date that the sample was received by the laboratory/organization performing the testing11/16/2021 Sample typeDepartment Acceptance
A brief description of the samplePG 64-16 Marathon The quantity of what the sample constitutes1 Can, NO TEST 10/28, 11/2
From where was the sample collectedSource First name of sampler or witnessed byTravis
Last name of sampler or witnessed by- Title of samplerUnknown
Telephone number of samplerUnknown Laboratory sample identification
Linked DIME Sample ID The fabricator/manufacturer/facility nameTeichert - Hallwood Plant
Transportation Laboratory (TL) Number804152 Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier Structure name
Bid ItemNot set

Material Information

Material TypeAsphalt Binder Performance GradePG 64-16
ModifiedNo Lot number9
Sublot number11 Tank number
Time of sample HMA Supplier
Certified Asphalt SupplierMarathon Petroleum Co. LP - Elk Grove CA MultigradeNo
Multigrade Type Asphalt Binder Mix NumberNot set
HMA TypeNot set HMA Supplier Mix ID NumberNot set

Test Details

DIME Sample ID: 2021-11-03-40
DIME Test ID: 2021-11-03-40-1
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2021-12-03

Test Results


Phase: Original binder
Input Type: Measured
Tester's full name: Eva Torres
Date of test: 11/28/2021
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 12.00 %
Stress Amplitude: 0.163 kPa
Phase Angle (δ) (for the 10 cycles): 87.6 degree
Complex Modulus (G*) (for the 10 measurements): 1.362 kPa
Test Temperature (Specimen 1): 64.0 C
Dynamic Shear, G*/sin(δ): 1.36 kPa
General comments (publicly viewable) (Max 1000 characters): Per 2018 Standard Specifications ORIG

Test was verified on 12/3/2021 ✔