Summary for Test 2021-11-03-41-1
Test performed: CTM 202-November 2011Project Information
| Project Identifiers | Project ID: 215424 DEA: 024G4404 EFIS: 0214000013 |
|---|---|
| DIST-CO-RTE-PM | 02-SIS-3-38.0/38.6 |
| Award Date | 04/05/2021 |
| Closeout Date | 08/14/2023 |
| Work Description | BRIDGE REPLACEMENT |
| Location Description | SISKIYOU COUNTY ABOUT 6 MILES NORTH OF FORT JONES FROM 0.3 MILE SOUTH TO 0.3 MILE NORTH OF LOWER MOFFETT CREEK ROAD |
| QA Service Level | 1 (Verified on 01/19/2021) |
Sample Information
| Sample Taken Date | 11/03/2021 | Sample Unique Key | 41 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 11/04/2021 |
| Sample type | Department Acceptance | A brief description of the sample | Shoulder Backing |
| The quantity of what the sample constitutes | Up to 3000 tons | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Karl | Last name of sampler or witnessed by | Houtman |
| Title of sampler | JET | Telephone number of sampler | |
| Laboratory sample identification | D78975 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Custom Crushing Inc | Transportation Laboratory (TL) Number | 853089 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | custom crushing |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Stockpile | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1-1/2 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2021-11-03-41
DIME Test ID: 2021-11-03-41-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2021-11-29
Test Results
What size aggregate is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Individual Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Measured
Tester's full name: Darrell Valasek
Date of test: 11/24/2021
| Sieve Size | Individual Mass Retained | Cumulative Percent Passing | ||||
|---|---|---|---|---|---|---|
| grams | ||||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 1405.0 grams | 88 % | |||||
| 1160.0 grams | 77 % | |||||
| 1115.0 grams | 67.7 % | |||||
| 533.0 grams | 63 % | |||||
| 1149.0 grams | 53 % | |||||
| 85.6 grams | 44 % | |||||
| 63.2 grams | 37 % | |||||
| 50.5 grams | 32 % | |||||
| 48.1 grams | 27 % | |||||
| 46.6 grams | 22 % | |||||
| 38.7 grams | 18 % | |||||
| 170.6 grams | ||||||
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 11/29/2021 ✔
