Summary for Test 2021-11-23-3-3
Test performed: CTM 670-December 2013Project Information
| Project Identifiers | Project ID: 212896 DEA: 04160304 EFIS: 0400000429 |
|---|---|
| DIST-CO-RTE-PM | 04-ALA-84-13.1/13.5 |
| Award Date | 11/17/2020 |
| Closeout Date | Not set |
| Work Description | NILES CANYON ALAMEDA CREEK BRIDGE REPLACEMENT |
| Location Description | IN FREMONT, AT ALAMEDA CREEK BRIDGE (BR 33-0036). |
| QA Service Level | 1 (Verified on 09/16/2019) |
Sample Information
| Sample Taken Date | 11/23/2021 | Sample Unique Key | 3 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 11/24/2021 |
| Sample type | Quality Assurance | A brief description of the sample | #10 HRC 500/510 couplers- Nucor to Gerdau bar |
| The quantity of what the sample constitutes | 92 #10 HRC 500/510 couplers | From where was the sample collected | Fabricator |
| First name of sampler or witnessed by | Greg | Last name of sampler or witnessed by | Thompson |
| Title of sampler | Associate Steel Inspector | Telephone number of sampler | 510-376-7155 |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Conco Rebar | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | B9-132-21 | Structure unique identifier | 33-0036 |
| Structure name | ALAMEDA CREEK BRIDGE | Bid Item | Not set |
Material Information
| Material Type | SMTL TM5 - Couplers | Production or Authorization Testing | Authorization Testing |
|---|---|---|---|
| Service or Ultimate | Ultimate | Material Standard Code | ASTM A706 |
| Material Grade | 60 | Rebar Manufacturer | Gerdau Nucor |
| Coupler Manufacturer | HRC | Intermediate Assembler or Fabricator | Esteban Birelas |
| Rebar Size | #10 | Coupler Model | 500/510 |
| Coating Standards | Uncoated | Shape of Rebar | Straight |
| Rebar Hoop Diameter | Rebar Hoop Fabricator | ||
| Coupler Component Heat/Lot Number(s) | 73120296 73118000 | Rebar Heat Number(s) | 3500018016 5804851603 |
| Rebar Size 2 | 10 | Coupler Unique ID | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2021-11-23-3
DIME Test ID: 2021-11-23-3-3
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Cyclical/Fatique Tensile with Slip)
Test Release Date: 2021-11-29
Test Results
Number of Samples Tested: 1
Input Type: Measured
Tester's full name: bewing
Date of test: 11/29/2021
UTM: 400kip
Temperature: 72.00 f
Halo ID:
| Num | Sample | Number of Cycles | Size | Mfg. Lot Number(s) | Slip (inch) | Area (sqin) | Peak Load (lbf) | Peak Stress (psi) | Comments | Tested By |
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 3 | No. 10/32mm | C-01 | 0 | 1.27 | 122894 | 96767 | Ok Necking | bewing |
General comments (publicly viewable) (Max 1000 characters): Ok Necking
Test Graph
Source: Bluehill Data Point File
WARNING: position or load not found in data points imported from Instron machine.
Test was verified on 11/29/2021 ✔